Description
Cypress Semiconductor CY7C64713-128AXC USB 2 Microcontroller 8-Bit GPIF / I2C / USART SMT / SMD TQFP-128 ROHS
EZ-USB FX1TM USB Microcontroller Full Speed USB Peripheral Controller , Single chip integrated USB transceiver, SIE, and enhanced 8051 microprocessor Fit, form, and function upgradable to the FX2LP (CY7C68013A) to 48 MHz clock rate Four clocks for each instruction cycle Two USARTS Three counters or timers Expanded interrupt system Two data pointers 3.3 V operation with 5 V tolerant inputs Smart SIE Vectored USB interrupts Separate data buffers for the setup and DATA portions of a CONTROL transfer Integrated I2C controller, running or 400 KHz 48 MHz, 24 MHz, or 12 MHz 8051 operation Four integrated FIFOs
- Smart media standard ECC generation
- Four integrated FIFOs
- Vectored for FIFO and GPIF Interrupts
- Up to 40 general purpose Ios
- Separate data buffers for the setup and DATA portions of a CONTROL transfer
- Vectored USB interrupts
- Smart serial interface engine
Features
? Single chip integrated USB transceiver, SIE, and enhanced
8051 microprocessor
? Fit, form, and function upgradable to the FX2LP (CY7C68013A)
? Pin compatible
? Object code compatible
? Functionally compatible (FX1 functionality is a subset of the
FX2LP)
? Draws no more than 65 mA in any mode, making the FX1
suitable for bus powered applications
? Software: 8051 runs from internal RAM, which is:
? Downloaded using USB
? Loaded from EEPROM
? External memory device (128 pin configuration only)
? 16 KB of on-chip code/data RAM
? Four programmable BULK/INTERRUPT/ISOCHRONOUS
endpoints
? Buffering options: double, triple, and quad
? Additional programmable (BULK/INTERRUPT) 64-byte
endpoint
? 8- or 16-bit external data interface
? Smart media standard ECC generation
? GPIF
? Allows direct connection to most parallel interfaces; 8- and
16-bit
? Programmable waveform descriptors and configuration
registers to define waveforms
? Supports multiple ready (RDY) inputs and Control (CTL)
outputs
? Integrated, industry standard 8051 with enhanced features:
? Up to 48 MHz clock rate
? Four clocks for each instruction cycle
? Two USARTS
? Three counters or timers
? Expanded interrupt system
? Two data pointers
? 3.3 V operation with 5 V tolerant inputs
? Smart SIE
? Vectored USB interrupts
? Separate data buffers for the setup and DATA portions of a
CONTROL transfer
? Integrated I2C controller, running at 100 or 400 KHz
? 48 MHz, 24 MHz, or 12 MHz 8051 operation
? Four integrated FIFOs
? Brings glue and FIFOs inside for lower system cost
? Automatic conversion to and from 16-bit buses
? Master or slave operation
? FIFOs can use externally supplied clock or asynchronous
strobes
? Easy interface to ASIC and DSP ICs
? Vectored for FIFO and GPIF Interrupts
? Up to 40 general purpose IOs (GPIO)
? Four package options:
? 128-pin TQFP
? 100-pin TQFP
? 56-pin SSOP
? 56-pin QFN Pb-free
Manufacturer:Cypress
Datasheet:CY7C64713-128AXC.pdf
