Description
S4B-PH-SM4-TB(LF)(SN) JST Connector Header Pin Header, Wire-to-Board, 2 mm, 1 Rows, 4 Contacts, Surface Mount, PH Series RoHS
The PH series side entry, surface mount shrouded header from JST are 2.0mm pitch, single row wire to board disconnect crimp style connectors. These are thin, low profile, highly reliable connectors with 8.0mm mounting height and 4.5mm width. Fully shrouded header has walls on all four sides to prevent improper connection to the mating housing and to prevent the instruction of flux and other contaminants. Its housing is made up of heat resistant resin so that it is not adversely affected during reflow soldering. Because of its compact size and surface mount termination, this connector meets the demand for high-density mounting of components inside electronic products.
Technical Attributes
No of Positions:4
Pitch:2 mm
Style/Orientation:Right Angle Header/Plug
Termination:Crimp
Operating Temp Range:-25C to +85C
Voltage Rating:100V
Current Rating:2A
Contact Plating:Tin
Material:Polyamide
No of Rows:1
Gender:Male
Type:Shrouded Header
Mating Type:Detent Lock
Color:Natural
Insulation Resistance:1000Mohm
Mounting Method: Surface Mount
Manufacturer: JST
MFG Part #: S4B-PH-SM4-TB(LF)(SN
