Description
01290 Wohner Universal Conductor Terminal 1.5 – 35mm (10mm Bar) RoHS
universal conductor terminal
4 – 35 mm2, AWG 10 – 2
for busbars flat busbars 10 mm
Advantages of the product
Terminal with integrated holding spring, captive clamping screw and opened terminal space.
Indication of nominal cross-section and tightening torque noted on the terminal.
Details IEC
Standards
IEC 61439-1:2011
IEC 60999-1:1999
IEC 60999-2:2003
GB/T 7251.1
Electrical data IEC
Rated current (IEC): 115 A
rated voltage (IEC) AC: 690 V
The insulation performance of the article depends on the installation conditions.
power dissipation of the article:
The power dissipation at a typical load of 80 % results to 0 W.
(The power dissipation at full load would be 0 W.)
Supplementary data IEC
The following values have been verified with tests under certain conditions. Please ask Whner for this conditions before designing your panel.
max. permitted voltage (IEC) AC: 1000 V
max. permitted voltage (IEC) DC: 1500 V
current capacity (IEC) max.: 270 A
rated peak withstand current Ipk max.: 34.9 kA
Details UL
Standards
UL 508
suitable for field-installed conductors
Electrical data UL
rated current (UL): 115 A
rated voltage (UL) AC: 600 V
for wires UL: Cu 75C
The suitability for feeder circuits (meeting the required feeder spacings) depends on the installation conditions.
Mechanical data
W x H x D: 16 x 29 x 35
weight: 4.7 kg/100
for busbars: flat busbars 10 mm
Terminal points
4 – 35 mm2 / AWG 10 – AWG 2
flexible cables, directly or with wire-end ferrule,
solid and stranded round cables,
lam. Cu 3 x 9 x 0.8 or 6 x 9 x 0.8
(flexible cables of maximum cross-section may not fit when using wire-end ferrule)
Material properties
Connecting screws: screw +/- (PZ3), galvanized, chromized
Terminal body: steel, galvanized and chromized
Retaining spring: corrosion-resistant spring steel
Version
Part no. 01 285 for 5mm thick busbars
Manufacturer: Electronic Components
MFG Part #: 1290
