Description
ILW00370 Canfield Connector – Solenoid Valve Interposed Lighted Wafer (MRO) Retro-Fit Indicator Light Iso-din 120 Vac Interposed Lighted Wafer – CA of 2
The Canfield Interposed Lighted Wafer is an electronic, state of the art lighting module designed to install between a DIN type coil and the mating connector. Utilizing SMT (Surface Mount Technology), the iLWs ultra-thin design and high luminescence Gallium Arsenide LEDs enable the lighted wafer to retrofit existing applications or to be used in conjunction with unlighted connectors. Designed to sandwich between the connector and the coil, the iLW seals from dust and moisture. The iLW can be installed several times without degradation of the contact surfaces and is not polarity dependent.
Retrofits: Sub-Micro 8mm. Sub-Micro 9.4mm. MINI Standard DIN 43650 Form “A” / ISO 4400, EN175301-803:2000. Environmental protection: NEMA 4 and IP 65 dust tight and water resistant. Ambient temperature range: -20 to +90C. Polyurethane encapsulation. Voltages available: 12 – 24V AC/DC 10 mA max. 120V AC. 6 mA max. 240V AC. 9 mA max. Light source: Gallium Arsenide light emitting diode. Not polarity dependent. The Canfield Interposed Lighted Wafer is an electronic, state of the art lighting module designed to install between a DIN type coil and the mating connector. Utilizing SMT (Surface Mount Technology), the iLWs ultra-thin design and high luminescence Gallium Arsenide LEDs enable the lighted wafer to retrofit existing applications or to be used in conjunction with unlighted connectors. Designed to sandwich between the connector and the coil, the iLW seals from dust and moisture. The iLW can be installed several times without degradation of the contact surfaces and is not polarity dependent.^
Manufacturer: Electronic Components
MFG Part #: ILW00370
