Description
B&R Automation ID68139 0TB103.9 Connector 24v 3pin for automation panel 900
Connector 24 VDC
3-pin female
Screw clamps 3.31 mm2
Note: Protected against vibration by the screw flange
Nominal values according to UL
Number of pins: 3 (female)
Type of terminal block: Screw clamp terminal block
Cable type: Only copper wires (no aluminum wires!)
Pitch: 5.08 mm
Connection cross section:
AWG wire: 26 to 14 AWG
Wire end sleeves with plastic covering: 0.20 to 1.50 mm2
Solid wires: 0.20 to 2.50 mm2
Fine-stranded wires: 0.20 to 1.50 mm2
With wire end sleeves: 0.20 to 1.50 mm2
Tightening torque: 0.4 Nm
Electrical properties
Nominal voltage: 300 V
Nominal current : 10 A / contact
Contact resistance: <=5 mOhm
Operating conditions
Pollution degree per EN 61131-2: Pollution degree 2
Manufacturer: Electronic Components
MFG Part #: 0TB103.9
