Description
The 1620A-S-156 is a High-accuracy Thermo Hygrometer can easily monitor and record conditions throughout entire facility with the DewK’s new Ethernet and wireless capabilities and set, upgraded LogWare-III software to notify immediately of changing conditions. This thermo-hygrometer accepts inputs from up to two sensors, which may be mounted directly on the unit or remotely (up to 100 feet away). Each sensor comes with a NVLAP-accredited calibration for temperature and relative humidity from Fluke calibration, containing its own NIST-traceable calibration data, so recalibration doesn’t require the main unit. Thermo-hygrometer reads temperature to ±0.25°C over its calibrated range of 15 to 35°C. Relative humidity readings are to ±2% RH from 20 to 70% RH.
^ Superior accuracy
^ Network enabled
^ Powerful logging and analysis tools
^ Two interchangeable calibrated sensors
^ Huge memory
^ Upgraded software – MET/TEMP II v4.3
^The Fluke MET/CAL compatible 1620A DewK Thermo-Hygrometer revolutionizes environmental monitoring for calibration laboratories.Now you can easily monitor and record conditions through-out your entire facility with the Hart Calibration 1620A DewKs new Ethernet and wire-less connections, and set your upgraded LogWare III software to notify you immediately of changing conditions.
^Youll still have the superior convenience, dependability, and NIST-traceable accuracy of a Fluke Hart Calibration 1620, but your Fluke Calibration 1620A will give you the added accessibility and peace of mind youve been looking for.
^Accuracy
^
^Two types of sensors are available from Hart, and the DewK may be originally purchased with either one. The high-accuracy sensor (“H” model) reads temperature to 0.125C over
^a calibrated range of 16C to 24C. Relative humidity readings are to 1.5 %RH from 20 %RH to 70 %RH.
^
^The standard-accuracy sensor (“S” model) reads temperature to 0.25C over its calibrated range of 15C to 35C. Relative humidity readings are to 2 %RH from 20 %RH to 70 %RH.
^
^All DewK sensors come with NVLAP accredited certificates of calibration for both temperature and humidity, complete with data and NIST traceability. Hart provides exceptional uncertainties, including total test uncertainty ratios better than 3:1 for both temperature and relative humidity-even for the high-accuracy sensors!
^
^Both sensors can also measure temperature below their respective calibrated ranges to 0C and above their respective calibrated ranges to 50C with typical accuracy of 0.5C. And RH readings from 0 %RH to 20 %RH and from 70 %RH to 100 %RH are typically within 3 %.
Manufacturer Part Number: 1620A-S-156
Electronic Components
