GWconnect

®

  Push  In  technology  offers  the  quickest  wiring  time  of  Heavy 

Duty Connectors, as the end user does not need any tool to wire the contacts 
or open the clamps.

Save your time and costs with the GWconnect 
Push In inserts. You just have to insert the 
wire into the clamp hole and the connection 
is completed. No tool or leaning-surface is 
needed for the wiring and the connection is 
reliable, strong and vibration-proof. Up to 80% 
of assembling time is saved in comparison with 
the standard screw type inserts.

The clamping point in the front allows wiring, 
maintenance and electrical tests without 
releasing the insert from the Heavy Duty 
Connector enclosure. The high contact force 
between the conductor and the current bar is 

guaranteed by a stainless steel compression 
clamp, which gives a 100% safe connection. 

The Push In insert series is available for the 
complete range of sizes from 6B to 48B and 
is suitable for both solid and stranded wires 
with bush terminals. For wires from 1.5mm

2

 

the connection is possible also without bush 
terminals. 

Less time. More performance. Just push the 
wire in!

PUSH IN

©2015 Molex

Order No. 987651-2762

Printed in USA/GF/2015.09

www.molex.com

/product/gwconnect.html