51262353 · 0888-0070/1541-3601 · Pr

oduct Shor

t F

or

m · PSF 4.1 (773) GB · 

03

/2

012

-0

0

· Pr

inted in Ger

man

y · Subject t

o design c

hanges 

Pr

oduc

t S

ho

rt F

or

m

Product Short Form

PSF 4.1

PS

F 4

.1

WAGO Registered Trademarks

CAGE CLAMP

®

CAGE CLAMP

®

@

POWER CAGE CLAMP
FIT CLAMP

®

PUSH WIRE

®

TOPJOB

®

TOPJOB

®

@

WINSTA

®

WAGO

®

X-COM

®

X-COM

®

@

JUMPFLEX

®

TO-PASS

®

ProServe

®

EPSITRON

®

picoMAX

®

WAGO trademarks are brand names or territorial registered marks  

of WAGO Kontakttechnik GmbH & Co. KG

WAGO Full Line Catalogs 

Volume 1, Rail-Mounted Terminal Block Systems 

Volume 2, Connectors and PCB Terminal Blocks 

Volume 5,

 WINSTA

®

 – The Connection System

Volume 3, AUTOMATION

Volume 4, INTERFACE ELECTRONIC

• 

Rail-Mounted Terminal Blocks

• 

Modular Connectors (X-COM

®

-SYSTEM and X-COM

®

-SYSTEM)

• 

Patchboard Systems

• 

Terminal Strips

• 

PUSH WIRE

®

 Connectors for Junction Boxes

• 

Lighting Connectors

• 

Shield Connecting System

• 

PCB Terminal Blocks

• 

Feedthrough Terminal Blocks

• MULTI CONNECTION SYSTEM

• 

Pluggable PCB Connectors

• 

Specialty Connectors

•IP20 Modular I/O-SYSTEM

•Wireless Technology, 

TO-PASS

®

 Telecontrol Technology

•Industrial Switches, 

PERSPECTO

®

•IP67 Modular I/O-SYSTEM, IP67 Block I/O-SYSTEM

•IP67 Sensor/Actuator Boxes, IP67 Cables and Connectors

•Power Supplies

• 

Relays – Optocouplers – Special Functions

• 

Interface Modules

• 

Transducers

• Power Supplies

• 

Overvoltage Protection

• 

Wireless Technology

• 

Empty Housings and Mounting Carriers

•

WINSTA

®

 MINI – Connectors

•

WINSTA

®

 MINI special – Connectors

•

WINSTA

®

 MIDI – Connectors

•

WINSTA

®

 MIDI special – Connectors

•

WINSTA

®

 MAXI – Connectors

•

WINSTA

®

 RD – Cable Assemblies

•

WINSTA

®

 KNX – Connectors

•

WINSTA

®

 IDC – Flat Cables

1

 2

!

"

'

%

$

Operation of WAGO Connection Technologies*

* Please follow applicable product instructions for product-specific handling.

The universal connection for solid, stranded 

and fine-stranded conductors

Handling:

- Open clamping unit

- Insert the conductor

- Release clamp – done!

The universal connectionwith “

@

PECIAL” 

Handling:

- Open clamping unit

- Insert the conductor

- Release clamp – done!

-  Terminate both solid and ferruled conductors by simply push-

ing them in – no operating tool needed.

PUSH WIRE

®

 connection for solid and stranded 

conductors (depending on model used)

Handling:

Tool-free, twist-free terminations for solid and rigid 

stranded conductors – simply push into unit.

Insulation Displacement Connection (IDC)

Handling:

Push unstripped conductor into the IDC contact using an operat-

ing tool.

The universal connection for conductors larger than 6 

AWG (16 mm

2

)

Handling:

-  

Open clamp by turning appropriate hex wrench, or operating 

tool, counter-clockwise.

-  Press integrated latch to open clamping unit for hands-free wiring.

- Insert conductor until it hits backstop.

-

  A small, counter-clockwise rotation closes the clamp, securing 

conductor.

24 –  93

 

94  – 139

140 – 158

 

159 – 171

 

172 – 177

178 – 187 

188 – 189 

190 – 195

202 – 203

204

196 – 197 

198 – 201 

205 – 216

1

2

3

4

5

6

7

1

 3

PSF 4.1

CONTENTS

Rail-Mounted Terminal Block Systems

Through Terminal Blocks, Double- and Triple-Deck Terminal Blocks, Ground Terminal 

Blocks, Ex Terminal Blocks, High-Current Terminal Blocks, Diode Terminal Blocks, Fuse Ter-

minal Blocks, Disconnect Terminal Blocks, X-COM

®

 SYSTEM, X-COM

®

S SYSTEM, PUSH 

WIRE

®

 Connectors for Junction Boxes, Lighting Connectors

Excerpt from Full Line Catalog, Volume 1, Rail-Mounted Terminal Block Systems

Connectors and PCB Terminal Blocks

MULTI CONNECTION SYSTEM

:  

MICRO, MINI, MINI HD, MIDI, MIDI Classic, MAXI  

Rail-Mounted Terminal Blocks, Modular Terminal Blocks, Double-, Triple- and Quadruple-
Deck Terminal Strips, SMD Terminal Blocks, Terminal Blocks

Excerpt from Full Line Catalog, Volume 2, Connectors and PCB Terminal Blocks

AUTOMATION

Fieldbus Couplers, Programmable Fieldbus Controllers, Input and Output Modules, 

PERSPECTO

®

, 

TO-PASS

®

 Telecontrol Modules, Industrial Switches, Power Supply Units, 

Shield Connecting System 

Excerpt from Full Line Catalog, Volume 3, AUTOMATION

INTERFACE ELECTRONIC

JUMPFLEX

®

, Relay Modules, Optocoupler Modules, Relay Sockets, Interface Modules, 

Function Modules, Mounting Carriers

Excerpt from Full Line Catalog, Volume 4, INTERFACE ELECTRONIC

WINSTA

®

 – The Connection System

Applications, Product Range, System Partners

Reference to Full Line Catalog, Volume 5, 

WINSTA

®

 – The Connection System

TECHNICAL  

SECTION
SEARCH AIDS

ACCESSORIES

Marking Accessories

Mounting Accessories

Tools

Derating Curves

Technical Information

Index

Approvals – User Guide

Item Number Index and WAGO Addresses

0

4

Over 50 Years of Innova

tions

1951

The first WAGO 

spring clamp 

1974

WAGO PUSH 

WIRE

®

 Connector 

for Junction Boxes 

1977

Rail-mounted terminal 

blocks with CAGE CLAMP

®

Pluggable electronic functions  

on rail-mounted terminal blocks

2005

WAGO 

SPEEDWAY 767

,  

modular I/O-SYSTEM, IP67

Since its establishment in 1951, WAGO has been 

pioneering innovative connection systems in electrical 

engineering and electronics.

 

The idea for a screw-

less termination system was born in 1951; the first 

terminal blocks with spring clamp termination tech

-

nology were presented at the Hanover Fair the same 

year.

 

Precisely designed and manufactured, spring-loaded 

connections not only guarantee a faster and easier 

connection, but also offer a higher safety level since 

the contact quality is largely independent of operator 

skill.

 

Now, WAGO is the leading specialist of Spring 

Pressure Termination Technology and is providing 

components for automation technology.

 

In 1977, the 

success story of the CAGE CLAMP

®

 began – “vibra-

tion-proof, fast and maintenance-free connections.”

 

Safe operation for countless devices, systems and 

installation depends on the unconditional reliability of 

our products.

POWER  

CAGE CLAMP

®

1998

WINSTA

®

 –  

The Connection System

2001

1985

WAGO-I/O-SYSTEM, IP20

1995

0

 5

2008

2010

TO-PASS

®

 – Scalable Tele-

control Technology

PERSPECTO

®

Touch and Control Panels

2006

WAGO 

JUMPFLEX

®

Transducers and Pluggable Relay 

Modules

2006

2009

2010

TOPJOB

®

S Rail-Mounted 

Terminal Blocks

X-COM

®

 S

PUSH WIRE

®

 

Connector for 

Junction Boxes, 

2273 Series

2004

Compact splicing con-

nectors for all conductor 

types

Recognized and Approved Worldwide

0

 

6

1977

1980

1985

1990

1995

2000

2005

2010

From Pioneer to Leader

Number of spring clamps for terminal blocks and connectors produced to date

When the first terminal blocks with spring clamp ter

-

mination technology debuted at the Hanover Fair 

in 1951, it represented a significant advancement in 

manufacturing. At the time, manufacturing terminal 

blocks was not possible because the carbon steel 

of the time did not meet the high quality require-

ments

However, WAGO was quite active in the years 

leading up to the 1977 debut of the first series 

of CAGE CLAMP

®

-equipped rail-mount terminal 

blocks from 28 to 6 AWG (0.08–6mm²).

 With 

numerous developments – from the Suprafix 

banana plug product family up to the first range of 

rail-mounted terminal blocks for conductors up to 

6 AWG (16mm²) – WAGO has firmly established 

itself as an innovator.

 

With this reputation and WAGO’s slogan “vibration-

proof, fast and maintenance-free,” CAGE CLAMP

®

, 

which was superior to all previous connection 

technologies, has become a worldwide industrial 

standard.

 

Today, CAGE CLAMP

®

 technology has several 

imitators, yet it remains unmatched.

 Again WAGO 

is setting new standards with further develop

-

ments, such as CAGE CLAMP

®

 Compact (1996) 

for ultra-compact applications or WAGO POWER 

CAGE CLAMP (1998) for a rated cross section up 

to 4/0 AWG (95mm²).

 

Furthermore, figures speak 

for themselves: More than 53 billion spring clamps 

have been sold worldwide and, every day, millions 

of clamps are added to that number.

 

53 billion clamps

0

 7

WAGO Worldwide

WAGO Sondershausen

WAGO China

WAGO USA

WAGO Switzerland

  

WAGO Minden, Headquarters

WAGO was founded 1951 in Minden, Germany. 

Now, the WAGO Group consists of 32 companies 

with more than 5,000 employees, worldwide op

-

erations and global sales greater than 500 million 

euros (2010).

 

The first factory was located in Minden, Germany, 

which is also our headquarters. As part of WAGO’s 

global expansion, additional factories have been 

built: 1977 in Domdidier/Switzerland, 1979 in 

Milwaukee/USA, 1995 in Sondershausen/Ger

-

many and Dehli/India, 1997 in Tianjin/China and 

Wroclaw/Poland.

Products manufactured locally for domestic and 

foreign markets create the starting point for a 

local distribution network with strong coverage of 

the complete product range.

 Such organization 

enables WAGO subsidiaries and sales offices to 

develop and deliver custom-designed products 

that comply with local regulations and meet local 

demand.

 Approximately half of WAGO’s global 

staff of 5,000 is employed outside of Germany.

0

 

8

America > >

WAGO – At Home in the World

International success requires international 

presence.

WAGO is a group of companies that operates on 

the world stage with subsidiaries or agencies on 

all continents and production facilities in Germany 

(Minden/Westfalia and Sondershausen/Thuringia), 

Switzerland (Domdidier/Fribourg), Poland (Wro

-

zlaw), China (Tianjin), India (Noida/Delhi), USA 

(Germantown) and Japan (Koto-Ku/Tokio).

Our presence in local markets enables us to pro-

vide service tailored to our individual customers, 

with a finger on the pulse of our customers and 

suppliers.

 

This allows us to develop and deliver 

products and solutions that are compliant with local 

codes and regulations.

 

That is what we consider 

being close to our customers.



Production sites



Sales companies

Representatives

0

 9

Europe > >

Asia > >

0

10

Installation 

Connectors

WAGO Product Range: Electrical Interconnections

  Modular  

Terminal Blocks

X-COM

®

-SYSTEM

X-COM

®

S-SYSTEM

  PCB Terminal 

Blocks

0

 11

Rail-Mounted 

Terminal Block 

Systems

 Patchboard  

 Systems

WINSTA

®

 –  

The Connection System

 Connectors

0

12

0

12

WAGO Product Range: Automation

Power Supplies

WAGO 

SPEEDWAY 767

, 

Modular I/O-SYSTEM, IP67

PERSPECTO

®

WAGO-I/O-SYSTEM, IP20

0

 13

0

 13

Relay Modules and Relay Sockets

Overvoltage Protection

Interface Modules

JUMPFLEX

®

 – 

Transducers  

and Relay Modules

0

14

The Wide Variety of Applications

BUILDING AUTOMATION

POWER AND PROCESS TECHNOLOGY

Energy, food, water, chemical, petrochemical and metal industries

      

Building installation and automation 

0

 15

INDUSTRY

Plant automation and traffic engineering

• 

implement innovative solutions

• 

create a compact design

• 

save energy

• 

make equipment safer

• react to requirements in a flexible way

• 

minimize installation, maintenance costs and

downtime

• 

guarantee reliable operation under extreme

conditions

• 

guarantee high availability and technical safety

• 

accommodate individual customer requirements

WAGO products can be used in a wide range of applications.

 Our components and 

systems are used worldwide in industrial, automotive, process engineering, building and 

many other sophisticated applications.

0

16

S

WAGO Connection Technologies

PUSH WIRE

® 

technology is perfectly suited for fast connec-

tion of solid conductors.

 It utilizes the conductor’s stiffness to 

provide safe, direct insertion into the clamping unit.

 

This is the fastest way to connect stripped solid conductors.

 

PUSH WIRE

®

 technology is widely used in connectors for 

junction boxes that are also available for stranded conduc

-

tors.

 

Conductor removal is performed by simultaneously twist

-

ing and pulling the conductor.

 

Other types of PUSH WIRE

®

 connectors allow the connection 

of conductors with less rigidity by opening the clamp using a 

screwdriver or a push-button.

 

Similarly, the connected conductor can be easily removed by 

releasing the clamp.

The CAGE CLAMP

®

S technology offers the same quality and 

handling features as the CAGE CLAMP

®

 connection, however 

with a significant additional benefit: Solid and stranded con

-

ductors that are rigid enough, as well as fine-stranded conduc

-

tors with ferrules can be directly connected without any tools. 

This is achieved by simply pushing in the conductor until fully 

inserted, without having to previously open the clamping unit

0

 17

Rail-mounted terminal blocks with the patented WAGO CAGE 

CLAMP

® 

connection were introduced in 1977.

 The CAGE 

CLAMP

®

 technology is available for conductors with a rated 

cross section from 20 to 2 AWG (0.5–35mm

2

) in thousands 

of product variations.

The CAGE CLAMP

®

 technology is suitable for solid, stranded, 

fine-stranded and extra fine-stranded conductors from a 

cross section of 28 AWG (0.08mm

2

).

 Before inserting the 

conductor, the CAGE CLAMP

®

 spring must be opened using 

a screwdriver or, for many products, using an operating lever, 

push-button or slide.

After releasing the spring, the conductor, which has been 

inserted into the clamping point, is pressed against the current 

bar within a defined contact zone. The predefined contact 

force then ensures consistent clamping forces by automatically 

adjusting to the conductor cross section.

The POWER CAGE CLAMP connection technology is suitable 

for all conductor types from 10 to 4/0 AWG (6–95mm

2

).

 

The connected conductor is clamped in a double cage con-

sisting of a spring-loaded bracket and the U-shaped current 

bar.

To terminate the conductor, a standard Allen wrench is in

-

serted and rotated counterclockwise. Then, the locking tab is 

pushed in for hands free wiring.

 The prepared conductor can 

now be inserted until it hits the backstop.

 A short counterclock-

wise turn of the Allen wrench unlocks the locking tab. After 

rotating Allen wrench clockwise (automatic), the conductor is 

terminated securely.

0

18

S

Benefits of WAGO Connection Technology

Simple, easy-to-use design

CAGE CLAMP

®

S

 connection,  

push-in termination 

of solid 

and ferruled conductors

CAGE CLAMP

®

 

connection

CAGE CLAMP

®

 

connection

CAGE CLAMP

®

S 

connection

Front-entry wiring: 

Side-entry wiring: 

0

 19

1
2
3
4

1

2

3

4

1

2

3

4

A number of VDE directives mandate or recommend that only 

one conductor should or must be connected per clamping unit 

(e.g., DIN VDE 0611, Part 4, 02.91, Section 3.1.9).

 WAGO 

complies with this safety requirement, as expressed in the cor

-

responding directives.

 

Technical and economical benefits for the users:

• Each conductor is clamped independently.

• 

Any conductor size combination per potential can be safely

connected.

• Where re-wiring is required, only the conductor to be

changed is removed from the clamping point, all other

conductors remain safely clamped.

• The arrangement of more than two clamping units on one

current bar permits potential multiplication, without jumpers

or additional terminal blocks.

CAGE CLAMP

®

 and CAGE CLAMP

®

S clamp all copper con-

ductors from 28 to 2 AWG (0.08–35mm

2

) (4/0 AWG/

 

95mm

2

), or from 22 to 4 AWG (0.25–25mm

2

).

 Splice pro-

tection is not required, but possible.

The conductor is pressed against the current bar in the 

pre-

defined contact area

, without damage.

 The clamping force 

adjusts automatically to the conductor size.

 Dynamic contact 

compensates for changes/movement of the conductor to 

eliminate the risk of a loose connection.

CAGE CLAMP

®

 clamps one conductor per clamping unit.

One Conductor per Clamping Unit – Damage-Free 

Connections for all Copper Conductors

An unlikely connection demonstrates this capability: 24 AWG 

(0.2mm

2

) conductor (left) and 6 AWG (16mm

2

) conductor 

(right) in a 6 AWG (16mm

2

) terminal block.

solid

stranded

fine-stranded

fine-stranded with ferrule (gastight crimped)

CAGE CLAMP

®

 clamps one conductor per clamping unit.

0

20

Benefits of WAGO Connection Technology

Vibration- and Shock-Proof – Maintenance-Free

The 

vibration-proof properties

 of CAGE CLAMP

®

 connec-

tions have been tested and verified in a vibration test to IEC/

EN 60068-2-6.

 

In this test, a frequency band up to 2000Hz, 

at different accelerations up to 20g and different amplitudes 

up to 20m, is passed continuously in three axes.

 Additionally, 

international authorities have placed extremely demanding 

requirements on electrical installations. Railway authorities 

have applied testing for electrical installations in rolling stock 

(IEC/EN 61373); multiple marine agencies (e.g., GL, LR and 

DNV) have also held CAGE CLAMP

®

 to their lofty approval 

standards.

 

Each rigorous test was successfully passed.

 

In the 

Impact Test 

(IEC/EN 60068-2-27) or for railway ap

-

plications (IEC/EN 61373), test specimens are exposed to in

-

stant shock stresses, instead of permanent vibrations.

 Stresses 

up to 100g on the x-, y-, and z-axis were easily passed.

movable portion of the connection

rigid portion of the connection

Maintenance-free operation

 results from excellent long-

term consistency of the electrical and mechanical properties 

of the clamping connection – or more precisely, the clamping 

unit.

 The Voltage Drop Test evaluates clamping unit quality 

under stresses such as vibrations, temperature changes and 

corrosive influences, in order to verify that the contact point 

is gas-tight.

 The long-term consistency of CAGE CLAMP

®

 

technology has been demonstrated both through laboratory 

testing by international approval agencies and from world

-

wide applications.

 

The resulting maintenance-free operation reduces service 

costs, leading to greater equipment availability and reliability.

0

 21

CAGE CLAMP

®

 technology 

significantly reduces wiring 

times

, which helps minimize labor costs.

Additional savings provided via

 faster project commis-

sioning

 and 

elimination of service costs 

due to mainte-

nance-free terminations.

Time-Saving

Screw clamp con

-

nection

CAGE CLAMP

®

 and 

CAGE CLAMP

®

S, solid 

conductors without fer

-

rule, ferruled conductors

CAGE CLAMP

®

S, front-entry 

wiring, 

push-in termination

 

of solid and ferruled conduc-

tors 

Average manual wiring times in a 

percentage comparison (per MTM)

100

90

80

70

60

50

40

30

20

10

0

100 

48,3 

24,4

Savings go further

 by reducing both material and labor 

costs 

through eliminating the need to prepare ferrules or pin 

terminals prior to termination. 

Front-entry terminal blocks are 

specified for top-tier designs because they minimize both 

install time and effort.

in %

0

 22

 1

__

10

mV

A

Test

I

mV

≤ 10 mm

≤ 10 mm

Temperature

measurement

Voltage drop

measuring point

Voltage drop

measuring point

Benefits of WAGO Connection Technology

Gastight Clamping Units –  

Measurable Contact Quality

The 

Temperature-Rise Test

 examines the clamping unit, 

including the surrounding insulation, at rated current, over-

current and short-circuit current levels.

The 

Voltage Drop Test 

evaluates clamping unit quality 

under stresses such as vibrations, temperature changes and 

corrosive influences.

Test arrangement: “Voltage Drop Test”

coating) within a 

defined contact zone.

 

The conductor is em-

bedded into the soft 

tin layer with high 

contact pressure, 

securing it against corrosive infiltration.

The contact pressure    

 

 

 

exerted by CAGE CLAMP

®

 terminations is similar to screw-

style terminals.

Climatic chambers simulate standard atmospheres that could 

impact long-term constancy of clamping units. All WAGO 

products meet requirements for the following climatic tests:

• 

Temperature Cycling Test to  

IEC/EN 60947-7-1, IEC/EN 60998-2-2

• Industrial Atmospheres to EN ISO 6988, 

 

IEC/EN 60068-2-42, IEC/EN 60068-2-60

• Salt Spray Test to IEC/EN 60068-2-11, 

 

Marine Applications GL, LR, DNV

• Quick Change of Temperature to IEC/EN 60068-2-14

• 

Damp Heat,  

Cyclic (12 + 12 Hours)  

to IEC/EN 60068-2-30, 

 

Marine Applications GL, LR, DNV

Long-term consistency for the low contact resistance of both 

CAGE CLAMP

®

 and CAGE CLAMP

®

S results from 

gas-tight 

clamping units.

 

The spring clamp (acid- and saltwater-proof 

CrNi spring steel) presses the connected conductor against 

the current bar (electrolyte copper with lead-free, pure tin 

To best evaluate the quality of a clamping point, WAGO uses the following test procedures:

N

mm

2

P             =

Force F [ N ]

Area A [mm

2

]

[      ]

Test arrangement: “Temperature-Rise 

Test”

0

 23

mV

Test specimen

High-Current Carrying 

Capacity

The 

short-time withstand capacity

 is defined in standards 

such as IEC/EN 60947-7-1 for through rail-mounted terminal 

blocks. It is a 

current-carrying capacity of 120A per mm

2

 

nominal diameter

 for the duration of 1 second.

 

In the case 

of a 4/0 AWG (95 mm²) 

WAGO 285 Series

 High-Cur-

rent Terminal Block, this translates to 11,400A!

 

Ground conductor terminal blocks are submitted to the 

“120A per mm²” test for 3x one second.

The pass criterion for the test is the voltage drop (limit value 

and constancy).

 CAGE CLAMP

®

 and CAGE CLAMP

®

S con-

nections passed this test without damage or reduced function

-

ality.

Unrealistic test of a CAGE CLAMP

®

-equipped,12 AWG (4mm

2

) rail-mounted 

terminal block:

 Increase of current without time limit.

 In such an extreme test – 

normally, fuse devices would have interrupted the current – 

the electrical connec-

tion is undamaged.

Test arrangement: “Short-Time Current Withstand Test”

1

 24

TOPJOB

®

@

 Rail-Mounted Terminal Blocks

2000, 2001, 2002, 2004, 2006, 2010 and 2016 Series

Commoning

Testing

Pre-assembled connectors

Jumper contacts that are not required can be broken off 

and removed, the upper-side of the jumper can then be 

marked accordingly. Applies to 2001, 2002 and 2004 

Series. 

Testing of TOPJOB

®

S rail-mounted terminal blocks 

   using test plug adapter     or      testing tap

A thermal transfer printer and WAGO “smartDESIGNER” 

software generate the marking.

Pre-assembled connectors with CAGE CLAMP

®

S connec-

tion provide an additional connection option.

Twin integrated, spring-loaded 

jumper system allows use of 

comb-style jumper bars, test 

plugs and connectors.

Strip length, see packaging or instructions.

Conductor termination/removal 

Commoning

Marking

With screwdriver: The operation of the clamp remains the 

same for unprepared fine-stranded conductors or small 

cross sections that don’t allow push-in termination.

Push-in termination: Solid conductors with cross sections 

from either one size above, or up to two sizes below, the 

rated cross section can be pushed in directly – without 

tools.

Jumper bars rated at 800V 

(ex works).

Like the original CAGE CLAMP

®

, a screwdriver is used for conductor removal with CAGE CLAMP

®

S.

TOPJOB

®

S offers three marking positions for WMB mark-

ers, miniature WSB markers or a full-length marking strip.

800 V

800 V

stranded

fine-stranded

tip bonded

with ferrule

with pin terminal

CAGE CLAMP

®

S clamps the following copper conductors:

solid

1

25

<___

 48,5 mm/1.91 in 

___>

<_

__

 33 mm

/  

____

>

           1.3 in

<____________

 68 mm/2.67 in 

____________>

<_

__

 33 mm

/  

____>

           1.3 in

<_______

 58,5 mm/2.3 in 

_______>

<_

__

 33 mm

/  

____

>

           1.3 in

12

1

!

2-conductor through terminal block

gray 

2000-1201 

100

blue

 

2000-1204 

100

orange 

2000-1202 

100

red 

2000-1203 

100

black

 

2000-1205 

100

yellow 

2000-1206 

100

2-conductor ground terminal block

  green-yellow 

2000-1207

 100

End and intermediate plate, 

0.7 mm thick 

orange  

2000-1292 

100 (4x25)

gray  

2000-1291 

100 (4x25)

3-conductor through terminal block

gray 

2000-1301 

100

blue 

2000-1304 

100

orange

2000-1302 

100

red 

2000-1303 

100

black

 

2000-1305 

100

yellow 

2000-1306 

100

3-conductor ground terminal block

  green-yellow 

2000-1307

 100

End and intermediate plate, 

0.7 mm thick 

orange  

2000-1392 

100 (4x25)

gray  

2000-1391 

100 (4x25)

4-conductor through terminal block

gray 

2000-1401 

100

blue 

2000-1404 

100

orange 

2000-1402 

100

red 

2000-1403 

100

black

 

2000-1405 

100

yellow 

2000-1406 

100

4-conductor ground terminal block

  green-yellow 

2000-1407

 100

End and intermediate plate, 

0.7 mm thick 

orange  

2000-1492 

100 (4x25)

gray  

2000-1491 

100 (4x25)

Color 

Item No.  

Pack. Unit 

Color 

Item No.  

Pack. Unit 

Color 

Item No.  

Pack. Unit 

Item-Specific Accessories

2000 Series Accessories

 

Appropriate marking systems: 

WMB/Marking Strips

Push-in type jumper bar, 

insulated, I

N 

14 A, light gray

  2-way  

2000-402  

200 (8x25)

  3-way  

2000-403  

200 (8x25)

  4-way  

2000-404  

200 (8x25)

  5-way  

2000-405  

100 (4x25)

     :  

       

: 

10-way  

2000-410  

100 (4x25)

Protective warning marker,

 with high-voltage symbol, 

for 5 terminal blocks
yellow 

2000-115  

100 (4x25)

Operating tool with partially insulated shaft, 

type 1, (2.5 x 0.4) mm blade

210-719 

    1

Insulated ferrules,

 extra long, 

for TOPJOB

®

S terminal blocks 

see page 195

Push-in type jumper bar, 

insulated, I

N 

14 A, light gray

1 -   3  

2000-433  

200 (8x25)

1 -   4  

2000-434  

200 (8x25)

1 -   5  

2000-435  

100 (4x25)

    :  

       

: 

1 - 10  

2000-440  

100 (4x25)

WMB Multi marking system,

 

10 strips with 10 markers per card 
for 3.5 mm terminal block width, 
plain 

793-3501

  50 (10x5)

Star point jumper,

 insulated, 

I

N

 = I

N

 terminal block, light gray

1–3–5 

2000-405/011-000

100 (4x25)

Marking strips,

 plain 

11 mm wide, 
50m roll
white 

2009-110

       1

Test plug adapter,

 for test plug 4 mm Ø 

gray 

2009-174  

100 (4x25)

Testing tap, 

for max. 2.5 mm

2

/AWG 14

gray 

 2009-182   

100 (4x25)

1

  Conductor sizes: 0.14 – 1.5 mm

2

 “s + f-st”; 

Push-in conductor sizes: 0.5 – 1.5 mm

2

 “s” and 0.5 – 1 mm

2

 “insulated ferrule, 12 mm”

0.14 

- 1.0 (1.5) mm

2 

1

  AWG 24 - 16 

800 V/6 kV/3 

600 V, 10 A 

U

I

N

 13.5 A (18 A)  

600 V, 10 A 

2

Terminal block width 3.5 mm / 0.138 in 

L

   9 - 11 mm / 0.39 in

0.14 

- 1.0 (1.5) mm

2 

1

  AWG 24 - 16 

800 V/6 kV/3 

600 V, 10 A 

U

I

N

 13.5 A (18 A)  

600 V, 10 A 

2

Terminal block width 3.5 mm / 0.138 in 

L

   9 - 11 mm / 0.39 in

0.14 

- 1.0 (1.5) mm

2 

1

  AWG 24 - 16 

800 V/6 kV/3 

600 V, 10 A 

U

I

N

 13.5 A (18 A)  

600 V, 10 A 

2

Terminal block width 3.5 mm / 0.138 in 

L

   9 - 11 mm / 0.39 in

TOPJOB

®

@

Rail-Mounted Terminal Blocks 1.0 (1.5) mm²

2000 Series 

Suitable for Ex i applications

2 

Approvals

2 

Approvals

2 

Approvals

2

 Approvals are available online at: www.wago.com. 

For technical explanations and abbreviations, see technical section.

1

 26

<__ 

 33 mm/

 

__>

           

1.3 in

<__________

 70 mm/2.76 in 

__________>

<__ 

 33 mm/

 

__>

           

1.3 in

<______

 59,5 mm/2.34 in 

______>

<__ 

 33 mm/

 

__>

           

1.3 in

<___

 48,5 mm/1.91 in 

___>

12

TOPJOB

®

@

Through/Ground Conductor and Ex Terminal Blocks 1.5 (2.5) mm

2

2001 Series

0.25

 - 1.5 (2.5) mm

2 

1

  AWG 22 - 14

800 V/8 kV/3 

600 V, 10 A 

2

I

N

 18 A (24 A) 

600 V, 10 A 

U

Terminal block width 4.2 mm / 0.165 in

L

   9 – 11 mm / 0.39 in

0.25

 - 1.5 (2.5) mm

2 

1

  AWG 22 - 14

800 V/8 kV/3 

600 V, 10 A 

2

I

N

 18 A (24 A) 

600 V, 10 A 

U

Terminal block width 4.2 mm / 0.165 in

L

   9 – 11 mm / 0.39 in

0.25

 - 1.5 (2.5) mm

2 

1

   AWG 22 - 14

800 V/8 kV/3 

600 V, 10 A 

2

I

N

 18 A (24 A) 

600 V, 10 A 

U

Terminal block width 4.2 mm / 0.165 in

L

   9 – 11 mm / 0.39 in

2

 Approvals are available online at: www.wago.com. 

For technical explanations and abbreviations, see technical section.

Conductor sizes: 0.25 – 2.5 mm

2

 “s + f-st”; 

Push-in conductor sizes: 0.5 – 2.5 mm

2

 “s” and 

0.75 – 1.5 mm

2

 “insulated ferrule, 12 mm”

2 

Approvals

2 

Approvals

2 

Approvals

2-conductor through terminal block

gray 

4

 

2001-1201 

100

blue 

4

2001-1204 

100

orange 

4

 

2001-1202 

100

red 

4

 

2001-1203 

100

black 

4

2001-1205 

100

yellow 

4

 

2001-1206 

100

2-conductor ground terminal block

green-yellow 

4

 

2001-1207

100

Other terminal blocks with the same profile:

Diode 

2001-1211/1000-411

  Volume 1

End and intermediate plate, 

0.8 mm thick 

orange  

2002-1292 

100 (4x25)

gray  

2002-1291 

100 (4x25)

Separator, 

oversized, 0.8 mm thick 

orange  

2002-1294 

100 (4x25)

gray  

2002-1293 

100 (4x25)

3-conductor through terminal block

gray 

4

 

2001-1301 

100

blue 

4

 

2001-1304 

100

orange 

4

 2001-1302 

100

red 

4

 

2001-1303 

100

black 

4

2001-1305 

100

yellow 

4

 

2001-1306 

100

3-conductor ground terminal block

green-yellow 

4

 

2001-1307

100

Other terminal blocks with the same profile:

Diode 

2001-1311/1000-411

  Volume 1

LED 

2001-1321/1000-434

  Volume 1

End and intermediate plate, 

0.8 mm thick 

orange  

2002-1392 

100 (4x25)

gray  

2002-1391 

100 (4x25)

Separator, 

oversized, 0.8 mm thick 

orange  

2002-1394 

100 (4x25)

gray  

2002-1393 

100 (4x25)

4-conductor through terminal block

gray 

4

 

2001-1401 

100

blue 

4

 

2001-1404 

100

orange 

4

 

2001-1402 

100

red 

4

 

2001-1403 

100

black 

4

2001-1405 

100

yellow 

4

 

2001-1406 

100

4-conductor ground terminal block

green-yellow 

4

 

2001-1407

100

Other terminal blocks with the same profile:

Diode 

2001-1411/1000-411

  Volume 1

Diode 

2001-1411/1000-434

  Volume 1

Double-potential 

2001-1441

 

Volume 1

End and intermediate plate, 

0.8 mm thick 

orange  

2002-1492 

100 (4x25)

gray  

2002-1491 

100 (4x25)

Separator, 

oversized, 0.8 mm thick 

orange  

2002-1494 

100 (4x25)

gray  

2002-1493 

100 (4x25)

Color 

Item No.  

Pack. Unit  Color 

Item No.  

Pack. Unit  Color 

Item No.  

Pack. Unit 

Item-Specific Accessories 

Separator for Ex e/Ex i applications, see page 30

2001 Series Accessories

 

Appropriate marking systems: 

WMB/Marking Strips

Push-in type jumper bar, 

insulated, I

N 

18 A, light gray

 2-way  

2001-402   

200 (8x25)

 

 3-way  

2001-403   

200 (8x25)

 

 4-way  

2001-404   

200 (8x25)

    :   

      

: 

10-way  

2001-410   

100 (4x25)

Insulation stop,

 

5 pcs/strip, 
0.25 – 0.5 mm

2

 

light gray 

2001-171

   200 (8x25)

WMB Multi marking system, 

10 strips with 10 markers per card, 
stretchable 4 – 4.2 mm
plain 

793-4501    

5

Marking strip, 

plain, 

11 mm wide,  
50m roll
white 

2009-110

      1

Push-in type jumper bar, 

insulated, I

N 

18 A, light gray

1 -   3  

2001-433  

200 (8x25)

1 -   4  

2001-434  

200 (8x25)

1 -   5  

2001-435  

100 (4x25)

    :  

       

: 

1 - 10  

2001-440  

100 (4x25)

Protective warning marker,

 with high-voltage symbol, 

for 5 terminal blocks
yellow 

2001-115  

100 (4x25)

Push-in type wire jumper, 

insulated, I

N

 16 A, 

wire size 1.5 mm²/AWG 16

  60 mm 

2009-412 

100 (10x10)

110 mm 

2009-414 

100 (10x10)

250 mm 

2009-416 

100 (10x10)

TOPJOB

®

S connector, 

modular, 

for jumper contact slot
gray 

2001-511 

100 (4x25)

Spacer module

gray

 2001-549 

100 (4x25)

Operating tool with partially insulated shaft, 

type 1, (2.5 x 0.4) mm blade

210-719 

     1

Insulated ferrules,

 extra long, 

for TOPJOB

®

S terminal blocks 

see page 195

 

Suitable for Ex i applications

 

4

 

Suitable for Ex e II applications 

  550 V, 17 A

1

1

27

<__ 

 33 mm/

 

__>

           

1.3 in

<___

 48,5 mm/1.91 in 

___>

<__ 

 33 mm/

 

__>

           

1.3 in

<______

 59,5 mm/2.34 in 

______>

<__ 

 33 mm/

 

__>

           

1.3 in

<__________

 70 mm/2.76 in 

__________>

1

12

!

0.25 

- 2.5 (4) mm

2 

1

 

AWG 22 - 12

800 V/8 kV/3  

600 V, 20 A 

U

I

N

 24 A (32 A) 

600 V, 20 A 

2

Terminal block width 5.2 mm / 0.205 in

L

   10 - 12 mm / 0.43 in.

0.25 

- 2.5 (4) mm

2 

1

 

AWG 22 - 12

800 V/8 kV/3  

600 V, 20 A 

U

I

N

 24 A (32 A) 

600 V, 20 A 

2

Terminal block width 5.2 mm / 0.205 in

L

   10 - 12 mm / 0.43 in.

0.25 

- 2.5 (4) mm

2 

1

 

AWG 22 - 12

800 V/8 kV/3  

600 V, 20 A 

U

I

N

 24 A (32 A) 

600 V, 20 A 

2

Terminal block width 5.2 mm / 0.205 in

L

   10 - 12 mm / 0.43 in.

Please find the entire product range in our Full Line Catalog, Volume 1. Additional information at www.wago.com.

TOPJOB

®

@

Through/Ground Conductor and Ex Terminal Blocks 2.5 (4) mm

2

2002 Series

Conductor sizes: 0.25 – 4 mm

2

 “s + f-st”; 

Push-in conductor sizes: 0.75 – 4 mm

2

 “s” and  

0.75 – 2.5 mm

2

 “insulated ferrule, 12 mm”

2 

Approvals

2 

Approvals

2 

Approvals

2-conductor through terminal block

  gray 

4

 

2002-1201 

100

  blue 

4

 

2002-1204 

100

  orange 

4

 

2002-1202 

100

  red 

4

 

2002-1203 

100

  black 

4

 

2002-1205 

100

  yellow 

4

 

2002-1206 

100

2-conductor ground terminal block

  green-yellow 

4

 

2002-1207

 100

Other terminal blocks with the same profile:

  Diode 

2002-1211/1000-411

  Page 42

 

End and intermediate plate, 

0.8 mm thick 

 orange  

2002-1292 

100 (4x25)

 

gray  

2002-1291 

100 (4x25)

 
Separator, 

oversized, 0.8 mm thick 

 orange  

2002-1294 

100 (4x25)

 

gray  

2002-1293 

100 (4x25)

 

3-conductor through terminal block

  gray 

4

 

2002-1301 

100

  blue 

4

 

2002-1304 

100

  orange 

4

 2002-1302 

100

  red 

4

 

2002-1303 

100

  black 

4

 

2002-1305 

100

  yellow 

4

 

2002-1306 

100

3-conductor ground terminal block

  green-yellow 

4

 

2002-1307

 100

Other terminal blocks with the same profile:

  Diode 

2002-1311/1000-411

  Page 42

  LED 

2002-1321/1000-434

  Page 42

End and intermediate plate, 

0.8 mm thick 

 orange  

2002-1392 

100 (4x25)

 

gray  

2002-1391 

100 (4x25)

 
Separator, 

oversized, 0.8 mm thick 

 orange  

2002-1394 

100 (4x25)

 

gray  

2002-1393 

100 (4x25)

 

4-conductor through terminal block

  gray 

4

 

2002-1401 

100

  blue 

4

 

2002-1404 

100

  orange 

4

 

2002-1402 

100

  red 

4

 

2002-1403 

100

  black 

4

 

2002-1405 

100

  yellow 

4

 

2002-1406 

100

4-conductor ground terminal block

  green-yellow 

4

 

2002-1407

 100

Other terminal blocks with the same profile:

  Diode 

2002-1411/1000-411

  Page 42

  Diode 

2002-1411/1000-434

  Page 42

  Double-potential 

2002-1441

 

Volume 1

End and intermediate plate, 

0.8 mm thick 

 orange  

2002-1492 

100 (4x25)

 

gray  

2002-1491 

100 (4x25)

 
Separator, 

oversized, 0.8 mm thick 

 orange  

2002-1494 

100 (4x25)

 

gray  

2002-1493 

100 (4x25)

 

Color 

Item No.  

Pack. Unit  Color 

Item No.  

Pack. Unit  Color 

Item No.  

Pack. Unit 

Item-Specific Accessories 

Separator for Ex e/Ex i applications, see page 30

2002 Series Accessories

 

Appropriate marking systems: 

WMB/Marking Strips/WMB Inline/Mini-WSB

Push-in type jumper bar, 

insulated, I

N 

25 A, light gray

 

  2-way  

2002-402  

200 (8x25)

  

 3-way  

2002-403  

200 (8x25)

  

 4-way  

2002-404  

200 (8x25)

 

    :   

      

: 

 

10-way  

2002-410  

100 (4x25)

Insulation stop,

 5 pcs/strip 

   

200 strips 

 
 

light gray  

2002-171 

0.25–0.5 mm

2 

 

dark gray  

2002-172 

0.75–1 mm

2 

WMB Multi marking system, 

 

10 strips with 10 markers per card, 
stretchable 5 – 5.2 mm

 

plain 

793-5501   

5

Marking strip, 

plain, 

11 mm wide,  
50m roll

 

white 

2009-110

     1

Push-in type jumper bar, 

insulated, I

N 

25 A, light gray

 

1 -   3  

2002-433 

200 (8x25)

 

1 -   4  

2002-434 

200 (8x25)

 

1 -   5  

2002-435 

100 (4x25)

 

    :  

       

: 

 

1 - 10  

2002-440 

100 (4x25)

Protective warning marker,

 with high-voltage symbol,  

for 5 terminal blocks

 

yellow 

2002-115  

100 (4x25)

Staggered jumper, 

insulated, I

N 

25 A, light gray

 

2-way 

2002-472 

100 (4x25)

 

3-way 

2002-473 

100 (4x25)

 

4-way 

2002-474 

100 (4x25)

 

      :  

       

: 

 

12-way 

2002-482 

50 (2x25)

TOPJOB

®

S connector, 

modular, 

for jumper contact slot

 

gray 

2002-511 

100 (4x25)

 

Spacer module

 

gray

 2002-549 

100 (4x25)

Operating tool with partially insulated shaft, 

type 2,  (3.5 x 0.5) mm blade

 

  

210-720 

     1

Insulated ferrules,

 extra long,  

for TOPJOB

®

S terminal blocks  

see page 195

 

Suitable for Ex i applications

 

4

 

Suitable for Ex e II applications 

  550 V, 22 A

1

1

 28

<____

 52 mm/2.05 in 

____>

<____

 39 mm

/  

____

>

             1.54 in

<____

 52 mm/2.05 in 

____>

<____

 39 mm

/  

____

>

             1.54 in

12

2

 Approvals are available online at: www.wago.com. 

For technical explanations and abbreviations, see technical section.

0.25 

- 2.5 (4) mm

2 

1

 

AWG 22 - 12 

800 V/8 kV/3  

600 V, 20 A 

U

I

N

 24 A (32 A)  

600 V, 20 A 

2

Terminal block width 5.2 mm / 0.205 in 

L

   10 - 12 mm / 0.43 in.

3-conductor through terminal block 

  gray 

4

 

2002-6301 

100

  blue 

4

 

2002-6304 

100

  orange 

4

 

2002-6302 

100

Additional colors pending 

3-conductor ground terminal block 

  green-yellow 

4

 

2002-6307 

100

End and intermediate plate, 

0.8 mm thick 

  

orange  

2002-6392 

100 (4x25)

  

gray  

2002-6391 

100 (4x25)

4-conductor through terminal block 

  gray 

4

 

2002-6401 

100

  blue 

4

 

2002-6404 

100

  orange 

4

 

2002-6402 

100

Additional colors pending 

4-conductor ground terminal block 

  green-yellow 

4

 

2002-6407 

100

Notice: These terminal blocks cannot be commoned 
with push-in type jumper bars!

End and intermediate plate, 

0.8 mm thick 

  

orange  

2002-6392 

100 (4x25)

  

gray  

2002-6391 

100 (4x25)

0.25 

- 2.5 (4) mm

2 

1

 

AWG 22 - 12 

800 V/8 kV/3  

600 V, 20 A 

U

I

N

 24 A (32 A)  

600 V, 20 A 

2

Terminal block width 5.2 mm / 0.205 in 

L

   10 - 12 mm / 0.43 in.

TOPJOB

®

@

Through/Ground and Ex Terminal Blocks 2.5 (4) mm

2

, Angled Type

2002 Series

2002 Series Accessories   

  

Appropriate marking systems:  

WMB/Marker Strips/WMB Inline/Mini-WSB

Item-Specific Accessories

Push-in type jumper bar, 

insulated, I

N 

25 A, light gray

 

  2-way  

2002-402  

200 (8x25)

 

  3-way  

2002-403  

200 (8x25)

 

  4-way  

2002-404  

200 (8x25)

 

  5-way  

2002-405  

100 (4x25)

 

    :  

   

: 

 

10-way  

2002-410  

100 (4x25)

Push-in type jumper bars, 

light gray, insulated, I

N

 25 A 

 

1 -   3  

2002-433  

200 (8x25)

 

1 -   4  

2002-434  

200 (8x25)

 

1 -   5  

2002-435  

100 (4x25)

 

       :      

: 

 

1 - 10  

2002-440  

100 (4x25)

Staggered jumper, 

insulated, I

N 

25 A, light gray

 

  2-way  

2002-472  

100 (4x25)

 

  3-way  

2002-473  

100 (4x25)

 

  4-way  

2002-474  

100 (4x25)

 

  5-way  

2002-475  

50 (2x25)

 

    :  

   

: 

 

12-way  

2002-482  

50 (2x25)

TOPJOB

®

S connector, 

modular, 

for jumper contact slot 

 

gray 

2002-511  

100 (4x25)

 

Spacer module

 

gray

  2002-549  

100 (4x25)

Operating tool with partially insulated shaft, 

type 2,  (3.5 x 0.5) mm blade

  

210-720

         1

3- and 4-conductor terminal blocks

The TOPJOB

®

S rail-mounted terminal blocks 

have a 35-degree conductor entry angle 

permitting a very small bend radius and an 

extremely short wiring distance to the cable 

duct. For applications in switchgear and con-

trol cabinets using the LSC wiring system from 

Lütze, e.g., these terminal blocks are a space- 

and cost-saving solution. This allows the cable 

duct to be placed very close to the terminal 

blocks, keeping its height relatively low.

Product features: 

• 

CAGE CLAMP

®

S connection for all con-

ductor types, with the additional benefit of 

solid and ferruled conductors being simply 

pushed in

• 

Vibration-proof, fast, maintenance-free 

terminations 

• 

3-conductor through and ground conduc-

tor terminal blocks equipped with a dual 

jumper slot 

• 

4-conductor terminal blocks permit poten-

tial multiplication – no additional jumpers 

or terminal blocks needed 

• 

3- and 4-conductor terminal blocks have  

the same dimensions

An end plate must be applied when chang-

ing from a 3-conductor terminal block to a 

4-conductor terminal block and vice versa.

Color 

Item No.  

Pack. Unit 

Color 

Item No.  

Pack. Unit 

Insulated ferrules,

 extra long,  

for TOPJOB

®

S terminal blocks,

 

see page 195

 

Insulation stop,

 5 pcs/strip 

  

200 strips 

 
 

light gray  

2002-171 

0.25–0.5 mm

2 

 

dark gray  

2002-172 

0.75–1 mm

2 

Protective warning marker, 

with high-voltage symbol,  

for 5 terminal blocks

 

yellow 

2002-115  

100 (4x25)

 

Test plug adapter,

 for test plug 4 mm Ø 

 

gray 

2009-174  

100 (4x25)

 

Testing tap, 

for max. 2.5 mm

2

/AWG 14

 

gray 

2009-182  

100 (4x25)

Banana plugs, 

only for safety extra-low voltage (42 V)

 

black 

215-311 

     50

 

red 

215-212 

     50

 

blue 

215-711 

     50

 

Suitable for Ex i applications

 

4

 

Suitable for Ex e II applications 

  550 V, 22 A

2 

Approvals

2 

Approvals

Conductor sizes: 0.25 – 4 mm

2

 “s + f-st”; 

Push-in conductor sizes: 0.75 – 4 mm

2

 “s” and  

0.75 – 2.5 mm

2

 “insulated ferrule, 12 mm”

1

1

29

<__ 

 33 mm/

 

__>

           

1.3 in

<___

 52,5 mm/2.07 in 

____>

<__ 

 33 mm/

 

__>

           

1.3 in

<_______

 65,5 mm/2.58 in 

_______>

<__ 

 33 mm/

 

__>

           

1.3 in

<___________

 79 mm/3.11 in 

____________>

12

1

!

0.5 

- 4 (6) mm

2 

1

 

AWG 20 - 10

800 V/8 kV/3  

600 V, 30 A 

U

I

N

 32 A (41 A) 

600 V, 30 A 

2

Terminal block width 6.2 mm / 0.244 in

L

   11 - 13 mm / 0.47 in

0.5 

- 4 (6) mm

2 

1

 

AWG 20 - 10

800 V/8 kV/3  

600 V, 30 A 

U

I

N

 32 A (41 A) 

600 V, 30 A 

2

Terminal block width 6.2 mm / 0.244 in

L

   11 - 13 mm / 0.47 in

0.5 

- 4 (6) mm

2 

1

 

AWG 20 - 10

800 V/8 kV/3  

600 V, 30 A 

U

I

N

 32 A (41 A) 

600 V, 30 A 

2

Terminal block width 6.2 mm / 0.244 in

L

   11 - 13 mm / 0.47 in

TOPJOB

®

@

Through/Ground Conductor and Ex Terminal Blocks 4 (6) mm

2

2004 Series

Conductor sizes: 0.5 – 6 mm

2

 “s + f-st”; 

Push-in conductor sizes: 1 – 6 mm

2

 “s” and 

0.75 – 4 mm

2

 “insulated ferrule, 12 mm”

Please find the entire product range in our Full Line Catalog, Volume 1. Additional information at www.wago.com.

2 

Approvals

2 

Approvals

2 

Approvals

2-conductor through terminal block

gray 

4

 

2004-1201 

100

blue 

4

2004-1204 

100

orange 

4

 

2004-1202 

100

red 

4

 

2004-1203 

100

black 

4

2004-1205 

100

yellow 

4

 

2004-1206 

100

2-conductor ground terminal block

green-yellow 

4

 

2004-1207

100

End and intermediate plate, 

1 mm thick 

orange  

2004-1292 

100 (4x25)

gray  

2004-1291 

100 (4x25)

Separator, 

oversized, 0.8 mm thick 

orange  

2004-1294 

100 (4x25)

gray  

2004-1293 

100 (4x25)

3-conductor through terminal block

gray 

4

 

2004-1301 

100

blue 

4

 

2004-1304 

100

orange 

4

 2004-1302 

100

red 

4

 

2004-1303 

100

black 

4

2004-1305 

100

yellow 

4

 

2004-1306 

100

3-conductor ground terminal block

green-yellow 

4

 

2004-1307

100

End and intermediate plate, 

1 mm thick 

orange  

2004-1392 

100 (4x25)

gray  

2004-1391 

100 (4x25)

Separator, 

oversized, 0.8 mm thick 

orange  

2004-1394 

100 (4x25)

gray  

2004-1393 

100 (4x25)

4-conductor through terminal block

gray 

4

 

2004-1401 

100

blue 

4

 

2004-1404 

100

orange 

4

 

2004-1402 

100

red 

4

 

2004-1403 

100

black 

4

2004-1405 

100

yellow 

4

 

2004-1406 

100

4-conductor ground terminal block

green-yellow 

4

 

2004-1407

100

End and intermediate plate, 

1 mm thick 

orange  

2004-1492 

100 (4x25)

gray  

2004-1491 

100 (4x25)

Separator, 

oversized, 0.8 mm thick 

orange  

2004-1494 

100 (4x25)

gray  

2004-1493 

100 (4x25)

Color 

Item No.  

Pack. Unit 

Color 

Item No.  

Pack. Unit 

Color 

Item No.  

Pack. Unit 

Item-Specific Accessories 

Separator for Ex e/Ex i applications, see page 30

2004 Series Accessories

 

Appropriate marking systems: 

WMB/Marking strips/Mini-WSB

Push-in type jumper bar, 

insulated, I

N 

32 A, light gray

 2-way  

2004-402   

200 (8x25)

 

 3-way  

2004-403   

200 (8x25)

 

 4-way  

2004-404   

100 (4x25)

    :   

      

: 

10-way  

2004-410   

100 (4x25)

Insulation stop,

 5 pcs/strip 

   

200 strips 

light gray  

2004-171 

0.25–0.5 mm

2

dark gray  

2004-172 

0.75–1 mm

2 

WMB Multi marking system, 

10 strips with 10 markers per card, 
stretchable 5 – 5.2 mm
plain 

793-5501   

5

Marking strip, 

plain, 

11 mm wide,  
50m roll
white 

2009-110

      1

Push-in type jumper bar, 

insulated, I

N 

32 A, light gray

1 -   3  

2004-433  

200 (8x25)

1 -   4  

2004-434  

200 (8x25)

1 -   5  

2004-435  

100 (4x25)

    :  

       

: 

1 - 10  

2004-440  

100 (4x25)

Protective warning marker,

 with high-voltage symbol, 

for 5 terminal blocks
yellow 

2004-115  

100 (4x25)

Star point jumper,

 insulated, 

I

N

 = I

N

 terminal block, light gray

1–3–5 

2004-405/011-000

100 (4x25)

Step-down jumper, 

insulated, 

I

N

 32 A

 

light gray 

2006-499  

50 (2x25)

TOPJOB

®

S connector, 

modular, 

for jumper contact slot
gray 

2004-511  

100 (4x25)

Spacer module

gray

  2004-549  

100 (4x25)

Operating tool with partially insulated shaft, 

type 2,  (3.5 x 0.5) mm blade

210-720 

      1

Insulated ferrules,

 extra long, 

for TOPJOB

®

S terminal blocks 

see page 195

 

Suitable for Ex i applications

 

4

 

Suitable for Ex e II applications 

  550 V, 30 A

1

1

 30

<_

_

  33 mm/

 

__>

         

1.

3 

in

<______

 57,5 mm/2.26 in 

______>

<__ 

 33 mm/

 

__>

1.30 in

<__________

 73,5 mm/2.89 in 

__________>

12

2

 Approvals are available online at: www.wago.com. 

For technical explanations and abbreviations, see technical section.

TOPJOB

®

@

Through/Ground Conductor and Ex Terminal Blocks 6 (10) mm

2

2006 Series

2006 Series Accessories

 

Appropriate marking systems: 

WMB/Marking strips/Mini-WSB

Item-Specific Accessories

Push-in type jumper bar, 

insulated, I

N

 41 A, light gray

1 -  3 

2006-433  

50 (2x25)

1 -  4 

2006-434  

50 (2x25)

1 -  5 

2006-435  

50 (2x25)

Step-down jumper, 

insulated, 

I

N

 32 A

 

light gray 

2006-499  

50 (2x25)

Operating tool with partially insulated shaft, 

type 3, (5.5 x 0.8) mm blade
 

210-721 

      1

Banana plugs, 

only for safety extra-low voltage (42 V)

black 

215-311 

    50

red 

215-212 

    50

blue 

215-711 

    50

WMB Multi marking system, 

10 strips with 10 markers per card, 
stretchable 5 – 5.2 mm
 

plain 

793-5501

  50 (10x5)

Push-in type jumper bar, 

insulated, I

N

 41 A, light gray

2-way 

2006-402  

50 (2x25)

3-way 

2006-403  

50 (2x25)

4-way 

2006-404  

50 (2x25)

5-way 

2006-405  

50 (2x25)

Star point jumper,

 insulated, 

I

N

 = I

N

 terminal block,  

light gray
1–3–5 

2004-405/011-000

100 (4x25)

Protective warning marker, 

with high-voltage symbol, 

for 5 terminal blocks
yellow 

2006-115  

100 (4x25)

Test plug adapter,

 for test plug 4 mm Ø 

gray

 

2009-174  

100 (4x25)

Testing tap, 

for max. 2.5 mm

2

/AWG 14

gray

 

2009-182  

100 (4x25)

Marking strips, 

plain, 

11 mm wide,  
50m roll
white 

2009-110

      1

Insulated ferrules,

 extra long, 

for TOPJOB

®

S terminal blocks 

see page 195

3-conductor through terminal block

gray 

4

 

2006-1301 

   

25

blue 

4

 

2006-1304 

   

25

orange 

4

 

2006-1302 

   

25

3-conductor ground terminal block

green-yellow 

4

 

2006-1307

   

25

End and intermediate plate, 

1 mm thick

orange 

2006-1392 

100 (4x25)

gray 

2006-1391 

100 (4x25)

2-conductor through terminal block

gray 

4

 

2006-1201 

   

50

blue 

4

 

2006-1204 

   

50

orange 

4

 

2006-1202 

   

50

2-conductor ground terminal block

green-yellow 

4

 

2006-1207

   

50

End and intermediate plate, 

1 mm thick

orange 

2006-1292 

100 (4x25)

gray 

2006-1291 

100 (4x25)

Separator for Ex e/Ex i applications

According to EN 50020, a minimum distance of 

50 mm must be kept between live parts of Ex e 

and Ex i circuits. The use of Ex e/Ex i separators is 

a space-saving solution when Ex e and Ex i termi-

nal blocks are mounted on a common carrier rail.

Suitable for Series:  

279 to 282, 

2001, 2002 and 2004.

209-190 for 2-conductor terminal blocks.

209-191 for 2-, 3-, 4-conductor terminal blocks.

Separator for Ex e/Ex i applications, 

3 mm thick, 

orange

  90 mm wide 

209-190 

50 (2x25)

120 mm wide 

209-191 

50 (2x25)

Suitable for Ex i applications

 

4

 

Suitable for Ex e II applications 

  550 V, 38 A (2-conductor terminal blocks) 

550 V, 36 A (3-conductor terminal blocks)

0.5 

- 6 (10) mm

2 

1

 

AWG 20 - 8

800 V/8 kV/3  

600 V, 50 A 

U

I

N

 41 A (57 A) 

600 V, 50 A 

2

Terminal block width 7.5 mm / 0.295 in

L

   13 - 15 mm / 0.55 in

0.5 

- 6 (10) mm

2 

1

 

AWG 20 - 8

800 V/8 kV/3  

600 V, 50 A 

U

I

N

 41 A (57 A) 

600 V, 50 A 

2

Terminal block width 7.5 mm / 0.295 in

L

   13 - 15 mm / 0.55 in

Separator for Ex e/Ex i applications

Conductor sizes: 0.5 – 10 mm

2

 “s + f-st”; 

Push-in conductor sizes: 1.5 – 10 mm

2

 “s” and 

1.5 – 6 mm

2

 “insulated ferrule, 12 mm”

Color 

Item No. 

Pack. Unit

Color 

Item No. 

Pack. Unit

Item No. 

Pack. Unit

1

2 

Approvals

2 

Approvals

1

31

<_______________

 89 mm/3.5 in 

_______________>

<___

 37 mm/

 

___>

1.

46 in

<________

 68 mm/2.68 in 

_________>

<___

 37 mm/

 

___>

          

1.46 in

  

1

18

!

TOPJOB

®

@

Through/Ground Conductor and Ex Terminal Blocks 10 mm

2

 

2010 Series 

2010 Series Accessories

 

Appropriate marking systems: 

WMB/Marking strips/Mini-WSB

Item-Specific Accessories

Push-in type jumper bar, 

insulated, I

N

 57 A, light gray

 

1 -  3 

2010-433  

50 (2x25)

 

1 -  4 

2010-434  

50 (2x25)

 

1 -  5 

2010-435  

50 (2x25)

Finger guard,  

touchproof cover protects unused 
conductor entries

 

yellow 

2010-100  

100 (4x25)

 

Operating tool with partially insulated shaft, 

type 3, (5.5 x 0.8) mm blade

  

210-721        

1

Banana plugs, 

only for safety extra-low voltage (42 V)

 

black 

215-311 

    50

 

red 

215-212 

    50

 

blue 

215-711 

    50

WMB Multi marking system, 

 

10 strips with 10 markers per card, 
stretchable 5 – 5.2 mm

 

plain 

793-5501

  50 (10x5)

Push-in type jumper bar, 

insulated, I

N

 57 A, light gray

 

2-way 

2010-402  

50 (2x25)

 

3-way 

2010-403  

50 (2x25)

 

4-way 

2010-404  

50 (2x25)

 

5-way 

2010-405  

50 (2x25)

Step-down jumper, 

insulated, 

I

N

 32 A

  

light gray 

2006-499  

50 (2x25)

Protective warning marker, 

with high-voltage symbol,  

for 5 terminal blocks

 

yellow 

2010-115  

50 (2x25)

 

Test plug adapter,

 for test plug 4 mm Ø 

 

gray

 2009-174 

 

100 (4x25)

 

Testing tap, 

for max. 2.5 mm

2

/AWG 14

 

gray

 2009-182 

 

100 (4x25)

Marking strips, 

plain,  

11 mm wide,  
50m roll

 

white 

2009-110

      1

Insulated ferrules,

 extra long,  

for TOPJOB

®

S terminal blocks  

see page 195

3-conductor through terminal block

  gray 

4

 

2010-1301 

   

25

  blue 

4

 

2010-1304 

   

25

  orange 

4

 

2010-1302 

   

25

3-conductor ground terminal block

  green-yellow 

4

 

2010-1307 

   

25

End and intermediate plate, 

1 mm thick

 

orange 

2010-1392 

100 (4x25)

 

gray 

2010-1391 

100 (4x25)

2-conductor through terminal block

  gray 

4

 

2010-1201 

   

25

  blue 

4

 

2010-1204 

   

25

  orange 

4

 

2010-1202 

   

25

2-conductor ground terminal block

  green-yellow 

4

 

2010-1207 

   

25

End and intermediate plate, 

1 mm thick

 

orange 

2010-1292 

100 (4x25)

 

gray 

2010-1291 

100 (4x25)

0.5 

- 10 (16) mm

2 

1

 

AWG 20 - 6

800 V/8 kV/3  

600 V, 65 A 

U

I

N

 57 A (76 A) 

600 V, 65 A 

2

Terminal block width 10 mm / 0.394 in

L

   17 - 19 mm / 0.71 in

0.5 

- 10 (16) mm

2 

1

 

AWG 20 - 6

800 V/8 kV/3  

600 V, 65 A 

U

I

N

 57 A (76 A) 

600 V, 65 A 

2

Terminal block width 10 mm / 0.394 in

L

   17 - 19 mm / 0.71 in

Conductor sizes: 0.5 – 16 mm

2

 “s + f-st”; 

Push-in conductor sizes: 2.5 – 16 mm

2

 “s” and  

2.5 – 10 mm

2

 “insulated ferrule, 18 mm”

Color 

Item No. 

Pack. Unit

Color 

Item No. 

Pack. Unit

Please find the entire product range in our Full Line Catalog, Volume 1. Additional information at www.wago.com.

 

Suitable for Ex i applications

 

4

 

Suitable for Ex e II applications 

  550 V, 51 A (2-conductor terminal blocks) 

  550 V, 50 A (3-conductor terminal blocks)

Step-down jumper

Step-down jumper, 

light gray, insulated, 

I

N

 32 A, 

commons 6/4mm

2

 (AWG 10/12) t. blocks with 

4/2.5/1.5mm

2

 (AWG 12/14/16) blocks.

 

2006-499  

50 (2x25)

Step-down jumper,

 light gray, insulated, 

I

N

 32 A, 

commons 16/10 mm

2

 (AWG 16/8) t. blocks with 

10/6/4/2.5 mm

2

 (AWG 8/10/12/14) blocks.

 

2016-499  

50 (2x25)

 

Item No. 

Pack. Unit

An end plate must be applied to the open side of 

the larger teminal block.
Further terminal blocks of the smaller cross section 

may be commoned using push-in type jumper bars.
Note: 

The total current flowing shall not exceed the 

rating of the step-down jumper.

  16 to 10 mm

2

 X 

  16 to  6 mm

2

 X 

  16 to  4 mm

2

  

X 

  16 to  2.5 mm

2

  

X 

  10 to  6 mm

2

 X 

  10 to  4 mm

2

 X 

  10 to  2.5 mm

2

  

X 

  6 to  4 mm

2

 X 

  6 to  2.5 mm

2

 X

Reduction of 

cross section

Push-in type 

jumper bar

Step-down 

jumper

2 

Approvals

2 

Approvals

1

1

 32

<_______________

 92 mm/3.62 in 

_______________>

<___

 37 mm/

 

___>

1.

46 in

<_________

 70 mm/2.76 in 

__________>

<___

 37 mm/

 

___>

          

1.46 in

  

18

2-conductor through terminal block

  gray 

4

 

2016-1201 

20

  blue 

4

 

2016-1204 

20

  orange 

4

 

2016-1202 

20

2-conductor ground terminal block

  green-yellow 

4

 

2016-1207 

20

End and intermediate plate, 

1 mm thick

 

orange 

2016-1292 

100 (4x25)

 

gray 

2016-1291 

100 (4x25)

0.5 

- 16 (25 “f-st”) mm

2

 

1

  AWG 20 - 4

800 V/8 kV/3  

600 V, 85 A 

U

I

N

 76 A (90 A) 

600 V, 85 A 

2

Terminal block width 12 mm / 0.472 in

L

   18 - 20 mm / 0.75 in

TOPJOB

®

@

Through/Ground Conductor and Ex Terminal Blocks 16 (25 “f-st”) mm

2

2016 Series

0.5 

- 16 (25 “f-st”) mm

2

 

1

  AWG 20 - 4

800 V/8 kV/3  

600 V, 85 A 

U

I

N

 76 A (90 A) 

600 V, 85 A 

2

Terminal block width 12 mm / 0.472 in

L

   18 - 20 mm / 0.75 in

Step-down jumper

Conductor sizes: 0.5 – 16 mm

2

 “s + f-st”; 

Push-in conductor sizes: 2.5 – 16 mm

2

 “s” and  

2.5 – 16 mm2 “insulated ferrule, 18 mm”

Step-down jumper, 

insulated, I

N

 32 A, 

light gray,  
commons 6/4mm

2

 (AWG 10/12) t. blocks with 

4/2.5/1.5mm

2

 (AWG 12/14/16) blocks.

 

2006-499  

50 (2x25)

Step-down jumper, 

insulated, I

N

 57 A,  

commons 16/10 mm

2

 (AWG 16/8) t. blocks with 

10/6/4/2.5 mm

2

 (AWG 8/10/12/14) blocks.

 

2016-499  

50 (2x25)

3-conductor through terminal block

  gray 

4

 

2016-1301 

20

  blue 

4

 

2016-1304 

20

  orange 

4

 

2016-1302 

20

3-conductor ground terminal block

  green-yellow 

4

 

2016-1307 

20

End and intermediate plate, 

1 mm thick

 

orange 

2016-1392 

100 (4x25)

 

gray 

2016-1391 

100 (4x25)

Color 

Item No. 

Pack. Unit

Color 

Item No. 

Pack. Unit

 

Item No. 

Pack. Unit

Push-in type jumper bar, 

insulated, I

N

 76 A, light gray

 

1 -  3 

2016-433  

50 (2x25)

 

1 -  4 

2016-434  

50 (2x25)

 

1 -  5 

2016-435  

50 (2x25)

Finger guard,  

touchproof cover protects unused 
conductor entries

 

yellow 

2016-100  

100 (4x25)

 

Operating tool with partially insulated shaft, 

type 3, (5.5 x 0.8) mm blade

 

  

210-721 

      1

Banana plugs, 

only for safety extra-low voltage (42 V)

 

black 

215-311 

    50

 

red 

215-212 

    50

 

blue 

215-711 

    50

WMB Multi marking system, 

 

10 strips with 10 markers per card, 
stretchable 5 – 5.2 mm

  

plain 

793-5501

 50 (10x5)

Push-in type jumper bar, 

insulated, I

N

 76 A, light gray

 

2-way 

2016-402  

50 (2x25)

 

3-way 

2016-403  

50 (2x25)

 

4-way 

2016-404  

50 (2x25)

 

5-way 

2016-405  

50 (2x25)

Star point jumper,

 insulated, 

I

N

 = I

N

 terminal block,  

light gray

 

1–3–5 

2016-405/011-000

 

  

 

 

50 (2x25)

Protective warning marker, 

with high-voltage symbol,  

for 5 terminal blocks

 

yellow 

2016-115  

50 (2x25)

 

Test plug adapter,

 for test plug 4 mm Ø 

 

gray

 

2009-174  

100 (4x25)

 

Testing tap, 

for max. 2.5 mm

2

/AWG 14

 

gray

 

2009-182  

100 (4x25)

Marking strips, 

plain,  

11 mm wide,  
50m roll

 

white 

2009-110

      1

Insulated ferrules,

 extra long,  

for TOPJOB

®

S terminal blocks  

see page 195

2016 Series Accessories

 

Appropriate marking systems: 

WMB/Marking strips/Mini-WSB

Item-Specific Accessories

An end plate must be applied to the open side of 

the larger teminal block.
Further terminal blocks of the smaller cross section 

may be commoned using push-in type jumper bars.
Note: 

The total current flowing shall not exceed the 

rating of the step-down jumper.

  16 to 10 mm

2

 X 

  16 to  6 mm

2

 X 

  16 to  4 mm

2

  

X 

  16 to  2.5 mm

2

  

X 

  10 to  6 mm

2

 X 

  10 to  4 mm

2

 X 

  10 to  2.5 mm

2

  

X 

  6 to  4 mm

2

 X 

  6 to  2.5 mm

2

 X

 

Suitable for Ex i applications

 

4

 

Suitable for Ex e II applications 

  550 V, 70 A (2-conductor terminal blocks) 

  550 V, 67 A (3-conductor terminal blocks)

Reduction of 

cross section

Push-in type 

jumper bar

Step-down 

jumper

2

 Approvals are available online at: www.wago.com. 

For technical explanations and abbreviations, see technical section.

Please find terminal blocks for larger wire sizes on page 59.

2 

Approvals

2 

Approvals

1

1

33

<____

 69,7 mm/2.74 in 

______>

<_

 51,7 mm/2.04 in

 

_>

<___

 61,8 mm/2.43 in

 

___>

<____

 69,7 mm/2.74 in 

______>

<_

 51,7 mm/2.04 in

 

_>

<___

 61,8 mm/2.43 in

 

___>

<____

 69,7 mm/2.74 in 

______>

<_

 51,7 mm/2.04 in

 

_>

<___

 61,8 mm/2.43 in

 

___>

<____

 69,7 mm/2.74 in 

______>

<_

 51,7 mm/2.04 in

 

_>

<___

 61,8 mm/2.43 in

 

___>

10

1

!

Please find the entire product range in our Full Line Catalog, Volume 1. Additional information at www.wago.com.

 

Item No.  

Item No.  

Pack. Unit 

Through/through terminal block, 

gray housing 
Marker carrier with 

without

  L/L   

2000-2231 2000-2201

   50

  N/L  

2000-2232 2000-2202

   50

  L/N  

2000-2233 2000-2203

   50

Blue housing 
  N/N  

2000-2234

 

2000-2204

 

 

50

4-conductor through terminal block, 

internal commoning, 

gray housing, conductor entry position colored in violet 
Marker carrier with 

without

  L  

2000-2238 2000-2208  

50

4-conductor through terminal block, 

internal commoning, 

blue housing, conductor entry position colored in violet 
 

N  

2000-2239 2000-2209

 

 50

4-conductor ground terminal block, 

internal common-

ing, green-yellow housing  
Marker carrier with 

without

 

  PE  

2000-2237 

2000-2207  

50

Ground conductor/through terminal block,  

gray housing 
Marker carrier with 

without

 

  PE/N  

2000-2247 2000-2217

   50

  PE/L  

2000-2257 2000-2227

   50

End and intermediate plate, 

0.7 mm thick

 

orange 

2000-2292 

100 (4x25)

 

gray 

2000-2291 

100 (4x25)

End and intermediate plate, 

0.7 mm thick

 

orange 

2000-2292 

100 (4x25)

 

gray 

2000-2291 

100 (4x25)

2000 Series Accessories

 

Appropriate marking systems: 

WMB/Marking Strips

Item-Specific Accessories

Push-in type jumper bar, 

insulated, I

N 

25 A, light gray

 

1 -   3  

2000-433  

200 (8x25)

 

1 -   4  

2000-434  

200 (8x25)

 

1 -   5  

2000-435  

100 (4x25)

 

       :      

: 

 

1 - 10  

2000-440  

100 (4x25) 

Push-in type jumper bar, 

insulated, I

N 

14 A, light gray

 

  2-way  

2000-402 

200 (8x25)

 

  3-way  

2000-403 

200 (8x25)

 

  4-way  

2000-404 

200 (8x25)

 

  5-way  

2000-405 

100 (4x25)

 

    :  

   

: 

 

10-way  

2000-410 

100 (4x25)

Protective warning marker,

 with high-voltage symbol,  

for 5 terminal blocks 

 

yellow

 2000-115 

100 (4x25)

0.14 

- 1 (1.5) mm

2  

1

  AWG 24 - 16

500 V/6 kV/3  

I

N

 13.5 A  

Terminal block width 3.5 mm / 0.138 in 

L

   9 - 11 mm / 0.39 in

0.14 

- 1 (1.5) mm

2  

1

  AWG 24 - 16

500 V/6 kV/3  

I

N

 13.5 A  

Terminal block width 3.5 mm / 0.138 in 

L

   9 - 11 mm / 0.39 in

TOPJOB

®

@

Double-Deck Terminal Blocks 1 (1.5) mm

2 

2000 Series

Star point jumper,

 insulated, 

I

N

 = I

N

 terminal block, light gray

 

1–3–5 

2000-405/011-000

 

  

 

 

100 (4x25)

Operating tool with partially insulated shaft, 

type 2,  (3.5 x 0.5) mm blade

  

210-720

        1

 

Item No.  

Item No.  

Pack. Unit 

 

Item No.  

Item No.  

Pack. Unit   

Item No.  

Item No.  

Pack. Unit 

 

Ex e II approvals (pending)

Conductor sizes: 0.14 – 1.5 mm

2

 “s + f-st”; 

Push-in conductor sizes: 0.5 – 1.5 mm

2

 “s” and  

0.5 – 0.75 mm

2

 “insulated ferrule, 10 mm”

2 

Approvals

2 

Approvals

1

1

 34

<_____

 70 mm/2.76 in 

______>

<_

 52 mm/2.04 in 

__

>

<___

 62 mm/2.44 in 

____>

<_____

 70 mm/2.76 in 

______>

<_

 52 mm/2.04 in 

__>

<___

 62 mm/2.44 in

 

____

>

<__________

 105,5 mm/4.15 in 

___________>

<

 52,5 mm/2.07 in 

>

<___

 63 mm/2.48 in

 

____

>

<__________

 105,5 mm/4.15 in 

___________>

<

 52,5 mm/2.07 in 

>

<___

 63 mm/2.48 in 

____>

12

3

 Approvals are available online at: www.wago.com. 

For technical explanations and abbreviations, see technical section.

1

  Conductor sizes: 0.25 – 4 mm

2

 “s + f-st”; 

Push-in conductor sizes: 0.75 – 4 mm

2

 “s” and 0.75 – 2.5 mm

2

 “insulated ferrule, 12 mm”

Suitable for Ex i applications

 4

 

Ex e II approvals (pending)

Item No.  

Item No.  

Pack. Unit 

Item No.  

Item No.  

Pack. Unit 

2-cond. double-deck terminal block,

 for DIN 35 rail

Through/through terminal block, 

gray housing 
Marker carrier with 

without

L/L  

2002-2231 2002-2201

   50

N/L  

2002-2232 2002-2202

   50

L/N  

2002-2233 2002-2203

   50

Blue housing 

N/N  

2002-2234

 

2002-2204

 

50

Ground conductor/through terminal block, 

gray housing 

PE/N  

2002-2247 2002-2217

   50

PE/L  

2002-2257 2002-2227

   50

4-cond. double-deck terminal block, 

for DIN 35 rail 

Through terminal block, 

internal commoning,  

gray housing, conductor entry position colored in violet 
Marker carrier with 

without

L  

2002-2238  2002-2208  

50

4-conductor through terminal block, 

internal commoning, 

blue housing, conductor entry position colored in violet 

N  

2002-2239 2002-2209

 

 50

4-cond. double-deck terminal block, 

for DIN 35 rail 

Ground conductor terminal block, 

internal commoning,  

green-yellow housing 

PE  

2002-2237  2002-2207  

50

4-cond. double-deck terminal block,

 for DIN 35 rail

Through/through terminal block, 

gray housing 
Marker carrier with 

without 

L/L  

2002-2431 2002-2401

   50

N/L  

2002-2432 2002-2402

   50

L/N  

2002-2433 2002-2403

   50

Blue housing 

N/N  

2002-2434

 

2002-2404

 

50

Ground conductor/through terminal block, 

gray housing 

PE/N  

2002-2447 2002-2417

 

50

PE/L  

2002-2457 2002-2427

 

50

8-cond. double-deck terminal block, 

for DIN 35 rail 

Through terminal block, 

internal commoning,  

gray housing, conductor entry position colored in violet 
Marker carrier with 

without  

L  

2002-2438  2002-2408  

50

Through terminal block, 

internal commoning,  

blue housing, conductor entry position colored violet 

N  

2002-2439

 

2002-2409

   50

4-cond. double-deck terminal block,

 for DIN 35 rail

Ground conductor terminal block, 

internal common-

ing, green-yellow housing 

PE  

2002-2437 

2002-2407 

50

Push-in type jumper bar, 

insulated, I

N

 25 A, light gray

  2-way  

2002-402  

200 (8x25)

  3-way  

2002-403  

200 (8x25)

  4-way  

2002-404  

200 (8x25)

  5-way  

2002-405  

100 (4x25)

    :  

   

: 

10-way  

2002-410  

100 (4x25)

Push-in type jumper bar, 

insulated, I

N

 25 A, light gray

1 -   3  

2002-433  

200 (8x25)

1 -   4  

2002-434  

200 (8x25)

1 -   5  

2002-435  

100 (4x25)

       :      

: 

1 - 10  

2002-440  

100 (4x25) 

Staggered jumper, 

insulated, I

N

 25 A, light gray

  2-way  

2002-472  

100 (4x25)

  3-way  

2002-473  

100 (4x25)

  4-way  

2002-474  

100 (4x25)

  5-way  

2002-475  

50 (2x25)

    :  

   

: 

12-way  

2002-482  

50 (2x25)

TOPJOB

®

S connector, 

modular, 

for jumper contact slot 
gray 

2002-511 

100 (4x25)

Spacer module

gray

 2002-549 

100 (4x25) 

Protective warning marker,

 with high-voltage symbol, 

for 5 terminal blocks 
yellow

 2002-115   

100 (4x25)

Operating tool with partially insulated shaft, 

type 2, (3.5 x 0.5) mm blade
 

210-720

    1

Marking strips,

 plain 

11 mm wide, 
50m roll
white 

2009-110

    1

Insulated ferrules,

 extra long, 

for TOPJOB

®

S terminal blocks, 

see page 195

End and intermediate plate, 

0.8 mm thick

orange 

2002-2492 

100 (4x25)

gray 

2002-2491 

100 (4x25)

End and intermediate plate, 

0.8 mm thick

orange 

2002-2292 

100 (4x25)

gray 

2002-2291 

100 (4x25)

Item-Specific Accessories

 

Appropriate marking systems: 

WMB/Marking Strips

0.25 

- 2.5 (4) mm

2  

1

  AWG 22 - 12 

500 V/6 kV/3 

300 V, 20 A 

U

I

N

 24 A (28 A)  

600 V, 20 A 

2

Terminal block width 5.2 mm / 0.205 in 

L

   10 - 12 mm / 0.43 in

0.25

 - 2.5 (4) mm

2 

1

 

AWG 22 - 12 

800 V/8 kV/3 

I

N

 24 A (28 A) 

Terminal block width 5.2 mm / 0.205 in 

L

   10 - 12 mm / 0.43 in

TOPJOB

®

@

Double-Deck Terminal Blocks 2.5 (4) mm

2

2002 Series 

Item No.  

Item No.  

Pack. Unit 

Item No.  

Item No.  

Pack. Unit 

2 

Approvals

2 

Approvals

2002 Series Accessories

1

35

S

<_________

 93,5 mm/3.68 in 

_________>

<___

_

 69,5 mm/2.74 in 

___>

<______

 81,5 mm/3.21 in

 

______>

<_________

 93,5 mm/3.68 in 

_________>

<___

_

 69,5 mm/2.74 in 

___>

<______

 81,5 mm/3.21 in

 

______>

4

-Zulassungen in Vorbereitung

4

-Zulassungen in Vorbereitung

12

1

103,5 mm/4.08 in

 83,9 mm/3.3 in

96,8 mm/3.81 in

TOPJOB

®

@

Triple- and Quadruple-Deck Terminal Blocks 2.5 (4) mm

2

2002 Series 

1

  Conductor sizes: 0.25 – 4 mm

2

 “s + f-st”; 

Push-in conductor sizes: 0.75 – 4 mm

2

 “s” and 0.75 – 2.5 mm

2

 “insulated ferrule, 12 mm”

0.25

 - 2.5 (4) mm

2 

1

 

AWG 22 - 12 

800 V/8 kV/3 

300 V, 20 A 

U

I

N

 24 A (28 A) 

300 V, 20 A 

2

Terminal block width 5.2 mm / 0.205 in 

L

   10 - 12 mm / 0.43 in

Handling Quadruple-Deck Terminal Blocks

0.25

 - 2.5 (4) mm

2 

1

AWG 22 - 12 

800 V/8 kV/3 

I

N

 24 A 

Terminal block width 5.2 mm / 0.205 in 

L

   10 - 12 mm / 0.43 in

Please find the entire product range in our Full Line Catalog, Volume 1. Additional information at www.wago.com.

2 

Approvals

2 

Approvals

Item No.  

Item No.  

Pack. Unit 

Item No.  

Item No.  

Pack. Unit 

2-cond. triple-deck terminal block, 

for DIN 35 rail

Through/through/through terminal block,  

gray housing 
Marker carrier with   without 

 

L/L/L 

2002-3231 2002-3201

 

50

  L/L/N 

2002-3233 2002-3203

 

50

Blue housing 

N/N/N 

2002-3234 2002-3204

 

50

Ground conductor/through/through terminal block,  

gray housing 

PE/N/L 

2002-3247 2002-3217

 

50

PE/L/L 

2002-3257 2002-3227

 

50

6-cond. triple-deck terminal block, 

for DIN 35 rail

Through terminal block, 

internal commoning,  

gray housing, conductor entry position colored in violet 
Marker carrier with   without 

 

 L 

2002-3238 2002-3208

 

50

blue housing, conductor entry position colored in violet 
 N 

2002-3239 2002-3209

 

50

Shield/through/through terminal block, 

gray housing 

Shield/N/L 

2002-3248 2002-3218 

50

  Shield/L/L 

2002-3258 2002-3228 

50

Ground conductor terminal block, 

internal commoning,  

green-yellow housing 

PE  

2002-3237 

2002-3207 

50

Quadruple-deck, rail-mounted terminal block
or
Rail-mounted terminal block for electric motor wiring,  

gray housing 
Marker carrier with 

without

 L1-L2 

2002-4141 2002-4111

   25

L1-L2-L3 

2002-4131 2002-4101

   25

L1-L2-L3-PE 

2002-4157 2002-4127

   25

End and intermediate plate, 

1 mm thick

orange 

2002-4192 

100 (4x25)

gray 

2002-4191 

100 (4x25)

End and intermediate plate, 

0.8 mm thick

orange 

2002-3292 

100 (4x25)

gray 

2002-3291 

100 (4x25)

Item-Specific Accessories

 

Appropriate marking systems: 

WMB/Marking Strips

Item No.  

Item No.  

Pack. Unit 

Creating spacer housings for rail-mounted terminal blocks 

for electric motor wiring via termination port and operating 

slot covers.

Compact design: 3 phases and ground conductor in one 

terminal block.

Marking clamping units with WMB Multi marking system 

(see Full Line Catalog, Volume 1, Section 13)  

Group marking using marking strips.

Testing with test plug 2 mm Ø.

1

 36

TOPJOB

®

@

 Function Terminal Blocks

2002, 2004 and 2006 Series

Diode and LED terminal blocks

Commoning

Application

Triple-deck diode terminal blocks

Designing custom circuits:  

- via diode terminal blocks (e.g., collective fault signals)  

- via LED terminal blocks (e.g., monitoring units).

Custom circuit design via push-in type jumper bars. 

Example shows “lamp test circuit.”

Lamp test circuit

Space saving arrangement.

Fuse disconnect terminal blocks

Disconnect/test terminal blocks

Movable knife disconnects clearly indicate the circuit 

state. 

Dual jumper slots, in the same position as the 2002 Series 

terminal blocks. Commoning options in front of or behind 

the knife disconnect, depending on the power supply 

direction. One center and two side marker slots for WMB 

markers or marking strips.  

Additional marking option via pivoting marker carriers. 

Two disconnect terminal blocks with different potential are 

housed on two levels in a double-deck disconnect terminal 

block.

stranded

fine-stranded

tip bonded

with ferrule

with pin terminal

CAGE CLAMP

®

S clamps the following copper conductors:

solid

Fuse replacement 1

Commoning and marking

Before replacing the fuse, pivot the fuse holder into the 

locked open position.

Fuse replacement 2

Additional marking

One end of the fuse is automatically ejected from the 

holder when opening the cover.

Pluggable fuse module with blown fuse indication on a 

3-conductor carrier terminal block.

Mini-automotive blade-style fuses

Double-deck disconnect terminal blocks

Fuse terminal block for mini-automotive blade-style fuses

Strip length, see packaging or instructions.

1

37

<_______

 66,5 mm/2.62 in 

_______>

<_

 38 mm/1.5 in 

_>

<_

_

 33 mm

/  

___>

           1.3 in

<________

 66,5 mm/2.61 in 

_______>

(_

_

  33 mm/1.29 in

 

_)

<_

_

 38 mm/1.49 in 

__>

<________

 66,5 mm/2.62 in 

_______>

(________

 57,6 mm/ 2.26 in 

________)

S

12

1

0.25

 - 2.5 (4) mm

2 

1

 

AWG 22 - 12 

400 V/6 kV/3  

I

N

 16 A  

Terminal block width 5.2 mm / 0.205 in 

L

   10 - 12 mm / 0.43 in

Color 

Item No.  

Pack. Unit 

2-conductor disconnect/test terminal block 

gray 

2002-1671 

50

blue 

2002-1674 

50

orange 

2002-1672 

50

2-conductor through terminal block, 

same profile 

gray 

2002-1601 

50

blue 

2002-1604 

50

orange 

2002-1602 

50

0.25

 - 2.5 (4) mm

2 

1

 

AWG 22 - 12 

400 V/6 kV/3 

I

N

 10 A   

2

 

Terminal block width 5.2 mm / 0.205 in 

L

   10 - 12 mm / 0.43 in

Color 

Item No.  

Pack. Unit 

Color 

Item No.  

Pack. Unit 

TOPJOB

®

@

Disconnect/Test and Fuse Terminal Blocks, 2-Conductor 

2002 Series  

1

  Conductor sizes: 0.25 – 4 mm

2

 “s + f-st”; 

Push-in conductor sizes: 0.75 – 4 mm

2

 “s” and 

0.75 – 2.5 mm

2

 “insulated ferrule, 12 mm”

End and intermediate plate, 

1 mm thick 

orange  

2002-1692 

100 (4x25)

gray  

2002-1691 

100 (4x25)

End and intermediate plate, 

1 mm thick 

orange  

2002-1692 

100 (4x25)

gray  

2002-1691 

100 (4x25)

2002 Series Accessories 

Appropriate marking systems: 

WMB/Marking Strips/WMB Inline/Mini-WSB

Item-Specific Accessories

2-conductor fuse terminal block with end plate, 

with blown fuse indication, for miniature metric fuses, gray

  12 –   30 V ≃ 

2002-1611/1000-541 

     50

  30 –   65 V ≃ 

2002-1611/1000-542 

     50

          120 V ≃ 

2002-1611/1000-867

     50

          230 V ≃ 

2002-1611/1000-836

     50

2-conductor fuse terminal block with end plate, 

without blown fuse indication, gray

2002-1611

 

   50

0.25

 - 2.5 (4) mm

2 

1

 

AWG 22 - 12 

250 V/6 kV/3

I

N 

6.3  A  

2

Terminal block width 6.2 mm / 0.244 in 

L

   10 - 12 mm / 0.43 in

2-conductor fuse terminal block,  

for blade-style fuses acc. to DIN 72581-3f, ISO 8820-3

gray 

2002-1681 

50

- Individual arrangement:10 A 
- Block arrangement: 5 A  
Protection against direct contact must be observed for 
42 V and higher voltages!

End plate for fuse terminal blocks, 

2 mm thick

orange  

2002-992 

100 (4x25)

gray  

2002-991 

100 (4x25)

Push-in type jumper bar, 

insulated, I

N

 25 A, light gray

1 -   3 

2002-433 

200 (8x25)

1 -   4 

2002-434 

200 (8x25)

1 -   5 

2002-435 

100 (4x25)

       : 

     

:

1 - 10 

2002-440 

100 (4x25)

Disconnect plug for fuse terminal blocks, 

suitable 

when using the fuse terminal block 
as a disconnect terminal block
 

orange 

2002-401 

100 (4x25) 

TOPJOB

®

S connector, 

modular, 

for jumper contact slot
gray 

2002-511 

100 (4x25)

Spacer module

gray

 2002-549 

100 (4x25)

Protective warning marker, 

with high-voltage symbol, 

for 5 terminal blocks
yellow 

2002-115  

100 (4x25)

Operating tool with partially insulated shaft, 

type 2, (3.5 x 0.5) mm blade

210-720 

     1 

Push-in type jumper bar, 

insulated, I

N

 25 A, light gray

  2-way 

2002-402 

200 (8x25)

  3-way 

2002-403 

200 (8x25)

  4-way 

2002-404 

200 (8x25)

  5-way 

2002-405 

100 (4x25)

    : 

     

:

10-way 

2002-410 

100 (4x25)

For step-down jumpers, see page 31.
Staggered jumper, 

insulated, I

N

 25 A, light gray

  2-way  

2002-472  

100 (4x25)

  3-way  

2002-473  

100 (4x25)

  4-way  

2002-474  

100 (4x25)

  5-way  

2002-475  

50 (2x25)

    :  

   

: 

12-way  

2002-482  

50 (2x25)

Insulation stop,

 5 pcs/strip

 

200 strips

light gray 

2002-171 

0.25–0.5 mm

2

dark gray 

2002-172 

0.75–1 mm

2

Test plug adapter,

 for test plug 4 mm Ø 

 2009-174 

100 (4x25)

Testing tap, 

for max. 2.5 mm

2

/AWG 14

2009-182 

100 (4x25)

Test plug, 

with 500 mm cable, 2 mm Ø

red 

210-136

 

 50 (5x10)

Insulated ferrules,

 extra long, 

for TOPJOB

®

S terminal blocks, 

see page 195

 

Approval for Ex i applications (pending)

 4

 

Approval for Ex e II applications (pending)

3 

Approvals

3 

Approvals

3 

Approvals

2

 Nominal voltage and current are given by the fuse or blown fuse indicator!

3

 Approvals are available online at: www.wago.com. 

For technical explanations and abbreviations, see technical section.

Miniature metric fuses 5 x 20 

Series 

Item No. 

Overload and 

short circuit protection 

Short circuit 

protection only 

2002-1611
2002-1811

Individual 

arrangement 

Group 

arrangement 

Individual 

arrangement 

Group 

arrangement 

Fuse disconnect terminal blocks 

1.6 W 

1.6 W 

2.5 W 

2.5 W 

2002-1811/....-....
2002-1611/....-....

1.6 W

1.6 W 

2.5 W 

2.5 W 

Fuse terminal blocks with a width of 6.2 mm can be 

assembled adjacently. 

If there is 

no

 adjacent fuse terminal block at the end of 

the assembly, an end plate must be used. 
When selecting miniature metric fuses, the maximum 

power loss listed below shall not be exceeded. 

The power loss is determined according to IEC or EN 

60947-7-3/VDE 0611-6 at 23°C. 

The temperature rise of the terminal blocks must be 

checked according to their application and mounting. 

Higher ambient temperatures place additional strain 

on fuse cartridges. Therefore, in such applications, the 

rated current must be reduced if necessary. More details 

available from the manufacturer.

1

 38

<_____________

 87,5 mm/3.45 in 

_____________>

<_

 38 mm/1.5 in 

_>

<_

_

 33 mm

/  

___>

           1.3 in

<______________

 87,5 mm/3.45 in 

_____________>

(

 33 mm/ 1.29 in 

)

<______________

 87,5 mm/3.45 in 

______________>

(________

 57,6 mm/ 2.26 in 

________)

12

0.25

 - 2.5 (4) mm

2 

1

 

AWG 22 - 12 

400 V/6 kV/3  

I

N

 16 A  

Terminal block width 5.2 mm / 0.205 in 

L

   10 - 12 mm / 0.43 in

Color 

Item No.  

Pack. Unit 

4-conductor disconnect/test terminal block 

gray 

2002-1871 

50

blue 

2002-1874 

50

orange 

2002-1872 

50

4-conductor through terminal block, 

same profile 

gray 

2002-1801 

50

blue 

2002-1804 

50

orange 

2002-1802 

50

0.25

 - 2.5 (4) mm

2 

1

 

AWG 22 - 12 

400 V/6 kV/3 

I

N

 10 A  

2

 

Terminal block width 5.2 mm / 0.205 in 

L

   10 - 12 mm / 0.43 in

0.25

 - 2.5 (4) mm

2 

1

 

AWG 22 - 12 

400 V/6 kV/3 

I

N

 6.3 A 

2

 

Terminal block width 6.2 mm / 0.244 in

L

   10 - 12 mm / 0.43 in

Color 

Item No.  

Pack. Unit 

Item No.  

Pack. Unit 

TOPJOB

®

@

Disconnect/Test and Fuse Terminal Blocks, 4-Conductor

2002 Series  

End and intermediate plate, 

1 mm thick 

orange  

2002-1892  

100 (4x25)

gray  

2002-1891  

100 (4x25)

End and intermediate plate, 

1 mm thick 

orange  

2002-1892    

100 (4x25)

gray  

2002-1891    

100 (4x25)

4-conductor fuse terminal block,  

for blade-style fuses acc. to DIN 72581-3f, 
ISO 8820-3

gray 

2002-1881 

50

- Individual arrangement:10 A 
- Block arrangement: 5 A  
Protection against direct contact must be observed for 42 
V and higher voltages!

1

  

Conductor sizes: 0.25 – 4 mm

2

 “s + f-st”; 

Push-in conductor sizes: 0.75 – 4 mm

2

 “s” and 

0.75 – 2.5 mm

2

 “insulated ferrule, 12 mm”

4-conductor fuse terminal block with end plate, 

withs blown fuse indication by LED, gray

  12 –   30 V ≃

 

2002-1811/1000-541

 50

  30 –   65 V ≃ 

2002-1811/1000-542

 50

         120 V ≃

 

2002-1811/1000-867

 50

         230 V ≃

 

2002-1811/1000-836

 50

4-conductor fuse terminal block with end plate, 

without blown fuse indication 

gray  

2002-1811

50

3 

Approvals

3 

Approvals

3 

Approvals

2 

Nominal voltage and current are given by the fuse or blown fuse indicator!

3

 Approvals are available online at: www.wago.com. 

For technical explanations and abbreviations, see technical section.

2002 Series Accessories 

Appropriate marking systems: 

WMB/Marking Strips/WMB Inline/Mini-WSB

Item-Specific Accessories

Push-in type jumper bar, 

insulated, I

N

 25 A, light gray

 

 2-way 

2004-402  

200 (8x25)

 

 3-way 

2004-403  

200 (8x25)

 

 4-way 

2004-404  

200 (8x25)

 

 5-way 

2004-405  

100 (4x25)

    : 

     

:

10-way 

2004-410  

100 (4x25)

Push-in type jumper bar, 

insulated, I

N

 25 A, light gray

1 -  3 

2004-433  

200 (8x25)

1 -  4 

2004-434  

200 (8x25)

1 -  5 

2004-435  

100 (4x25)

       :       

:

1 - 10 

2004-440  

100 (4x25)

Insulation stop,

 5 pcs/strip

   

200 strips

light gray 

2002-171 

0.25–0.5 mm

2

dark gray 

2002-172 

0.75–1 mm

2

Insulated ferrules,

 extra long, 

for TOPJOB

®

S terminal blocks, 

see page 195

Operating tool with partially insulated shaft, 

type 2, (3.5 x 0.5) mm blade

210-720 

   1 

End plate for fuse terminal blocks, 

2 mm thick 

orange  

2002-992  

100 (4x25)

gray  

2002-991  

100 (4x25)

Push-in type jumper bar, 

insulated, I

N

 25 A, light gray

1 -  3 

2002-433  

200 (8x25)

1 -  4 

2002-434  

200 (8x25)

1 -  5 

2002-435  

100 (4x25)

       : 

     

:

1 - 10 

2002-440  

100 (4x25)

Disconnect plug for fuse terminal blocks, 

suitable 

when using the fuse terminal block 
as a disconnect terminal block

 

orange 

2002-401    

100 (4x25)

TOPJOB

®

S connector, 

modular, 

for jumper contact slot
gray 

2002-511  

100 (4x25)

Spacer module

gray

 

2002-549  

100 (4x25)

Protective warning marker, 

with high-voltage symbol, 

for 5 terminal blocks
yellow 

2002-115  

100 (4x25)

WMB Multi marking system, 

10 strips with 10 markers per card, 
stretchable 5 – 5.2 mm
 

plain 

793-5501

   50 (10x5)

Push-in type jumper bar, 

insulated, I

N

 25 A, light gray

 

 2-way 

2002-402  

200 (8x25)

 

 3-way 

2002-403  

200 (8x25)

 

 4-way 

2002-404  

200 (8x25)

 

 5-way 

2002-405  

100 (4x25)

    : 

     

:

10-way 

2002-410  

100 (4x25)

For step-down jumpers, see page 31.
Staggered jumper, 

light gray, insulated, I

N

 25 A 

 

 2-way  

2002-472  

100 (4x25)

 

 3-way  

2002-473  

100 (4x25)

 

 4-way  

2002-474  

100 (4x25)

 

 5-way  

2002-475  

50 (2x25)

    :  

   

: 

12-way  

2002-482  

50 (2x25)

Insulation stop,

 5 pcs/strip

 

200 strips

light gray 

2002-171 

0.25–0.5 mm

2

dark gray 

2002-172 

0.75–1 mm

2

Test plug adapter,

 for test plug 4 mm Ø 

 2009-174 

 

100 (4x25)

Testing tap, 

for max. 2.5 mm

2

/AWG 14

2009-182  

100 (4x25)

Test plug, 

with 500 mm cable, 2 mm Ø

red 

210-136

 

50 (5x10)

Double-deck marker carrier, 

pivoting

gray 

2002-121    

50 (2x25)

 

Approval for Ex i applications (pending)

 4

 

Approval for Ex e II applications (pending)

1

39

12

<______________

 87,5 mm/3.45 in 

_____________>

(

 33 mm/ 1.29 in 

)

<________

 66,5 mm/2.61 in 

_______>

(_

_

  33 mm/1.29 in

 

_)

<_

_

 38 mm/1.49 in 

__>

S

1

0.25

 - 2.5 (4) mm

2 

1

 

AWG 22 - 12 

400 V/6 kV/3  

I

N

 24 A  

Terminal block width 5.2 mm / 0.205 in 

L

   10 - 12 mm / 0.43 in

Color 

Item No.  

Pack. Unit 

2-conductor carrier terminal block 

  gray 

2002-1661 

50

0.25

 - 2.5 (4) mm

2 

1

 

AWG 22 - 12 

400 V/6 kV/3 

I

N

 24 A 

Terminal block width 5.2 mm / 0.205 in 

L

   10 - 12 mm / 0.43 in

250 V max. 

I

N

 6.3 A 

2

 

Plug width   

4 

6.1 mm / 0.24 in 

5 

5.2 mm / 0.205 in 

6 

10.4 mm / 0.409 in

Color 

Item No.  

Pack. Unit 

Item No.  

Pack. Unit 

TOPJOB

®

@

Carrier Terminal Blocks, 2- and 4-Conductor, 2002 Series 

Fuse Plugs, 2004 Series, Plugs 2002 Series

End and intermediate plate, 

1 mm thick 

orange  

2002-1692  

100 (4x25)

gray  

2002-1691  

100 (4x25)

End and intermediate plate, 

1 mm thick 

orange  

2002-1892  

100 (4x25)

gray  

2002-1891  

100 (4x25)

4-conductor carrier terminal block 

  gray 

2002-1861 

50

1

  

Conductor sizes: 0.25 – 4 mm

2

 “s + f-st”; 

Push-in conductor sizes: 0.75 – 4 mm

2

 “s” and 0.75 – 2.5 mm

2

 “insulated ferrule, 12 mm”

4

 Fuse plug,

 with pull-tab, 

for miniature metric fuses  
5 x 20 mm (see page 37)

2004-911

 

  50

with LED, can be used in both 
switching directions
LED, 12 – 30 V AC/DC

2004-911/1000-541

    50

LED, 30 – 65 V AC/DC

2004-911/1000-542

    50

LED, 120 – 250 V AC/DC 

2004-911/1000-836

    50

5

 Empty component plug housing, type 1

, 

2-pole  
5.2 mm wide

2002-800

100

6

 Empty component plug housing, type 2

, 

2-pole  
10.4 mm wide

2002-810

 

  50

6

 Empty component plug housing, type 3

, 

4-pole  
10.4 mm wide

2002-820

 

  50

5

 Diode module

, with 1N4007 diode, 

max. operating temperature 85°C, 
5.2 mm wide

2002-800/1000-411

 100

5

 LED module

, with red LED,  

max. operating temperature85°C, 5.2 mm wide
12 – 30 V AC/DC 

2002-800/1000-541

 100

30 – 65 V AC/DC 

2002-800/1000-542

 100

230 V AC/DC 

2002-800/1000-836

 100

3 

Approvals

3 

Approvals

3 

Approvals

Item-Specific Accessories

2002 Series Accessories

 Appropriate marking systems: 

WMB/Marking Strips/WMB Inline

 

Push-in type jumper bar, 

insulated, I

N

 25 A, light gray

 1 -  3 

2002-433  

200 (8x25)

 1 -  4 

2002-434  

200 (8x25)

 1 -  5 

2002-435  

100 (4x25)

       : 

     

:

 1 - 10 

2002-440  

100 (4x25)

TOPJOB

®

S connector, 

modular, 

for jumper contact slot
gray 

2002-511  

100 (4x25)

Spacer module

gray

 

2002-549  

100 (4x25)

Protective warning marker, 

with high-voltage symbol, 

for 5 terminal blocks
yellow 

2002-115  

100 (4x25)

Banana plugs, 

only for safety extra-low voltage (42 V)

black 

215-311 

     50

red 

215-212 

     50

blue 

215-711 

     50

WMB Multi marking system, 

10 strips with 10 markers per card, 
stretchable 5 – 5.2 mm
plain 

793-5501

   50 (10x5)

Shorting link,

 5 x 20 mm, 6.3 A, 

if the fuse plug is used as a discon-
nect plug
 

281-503  

250 (10x25)

Push-in type jumper bar, 

insulated, I

N

 25 A, light gray

 

 2-way 

2002-402  

200 (8x25)

 

 3-way 

2002-403  

200 (8x25)

 

 4-way 

2002-404  

200 (8x25)

 

 5-way 

2002-405  

100 (4x25)

    : 

     

:

10-way 

2002-410  

100 (4x25)

For step-down jumpers, see page 31.
Staggered jumper, 

insulated, I

N

 25 A, light gray

 

 2-way  

2002-472  

100 (4x25)

 

 3-way  

2002-473  

100 (4x25)

 

 4-way  

2002-474  

100 (4x25)

 

 5-way  

2002-475  

50 (2x25)

    :  

   

: 

12-way  

2002-482  

50 (2x25)

Insulation stop,

 5 pcs/strip

   

200 strips

light gray 

2002-171 

0.25–0.5 mm

2

dark gray 

2002-172 

0.75–1 mm

2

Test plug adapter,

 for test plug 4 mm Ø 

 2009-174 

 

100 (4x25)

Testing tap, 

for max. 2.5 mm

2

/AWG 14

2009-182  

100 (4x25)

Marking strips,

 plain 

11 mm wide, 
50m roll
white 

2009-110

      1

End plate for fuse terminal blocks, 

2 mm thick

orange  

2002-992  

100 (4x25)

gray  

2002-991  

100 (4x25)

4

5

6

1

 40

<_______________

 96,3 mm/3.79 in 

_______________>

<

38,2 mm/1.50 in 

>

<

 37 mm/1.46 in 

_>

          

 

<_____

 49 mm/1.93 in 

__

___

>

          

 

<___________________

 96,3 mm/3.79 in 

__________________>

<

 38,2 mm/1.50 in 

_>

(_

_

  3

2,9 mm/1.29 in 

_)

<_

_

 37,9mm/1.49 in 

__

>

12

<_______________

 96,3 mm/3.79 in 

_______________>

<

38,2 mm/1.50 in 

>

<_

 37 mm/1.46 in 

__

>

          

 

<_____

 49 mm/1.93 in

 

__

__

_>

          

 

TOPJOB

®

@

Disconnect and Fuse Terminal Blocks 6 (10) mm

2

2006 Series 

0.5 

- 6 (10) mm

2 

1

  AWG 20 - 8 

800 V/6 kV/3 

I

N

 30 A  

Terminal block width 7.5 mm / 0.295 in 

L

   13 - 15 mm / 0.55 in

2006 Series Accessories

 

Appropriate marking systems: 

WMB/Marking Strips/WMB Inline

Item-Specific Accessories

2-conductor disconnect terminal block, 

with test point, orange disconnect link 

gray  

2006-1671

 

25

blue  

2006-1674 

25

2-conductor through terminal block, 

same profile

gray  

2006-1601

 

25

blue  

2006-1604 

25

End and intermediate plate, 

1 mm thick 

orange  

2006-1692 

100 (4x25)

gray  

2006-1691 

100 (4x25)

Item No.  

Pack. Unit 

Item No.  

Pack. Unit 

Color 

Item No.  

Pack. Unit 

Push-in type jumper bar, 

insulated, I

N

 41 A, light gray

2-way  

2006-402  

50 (2x25)

3-way  

2006-403  

50 (2x25)

4-way  

2006-404  

50 (2x25)

5-way  

2006-405  

50 (2x25)

Push-in type jumper bar, 

insulated, I

N

 41 A, light gray

1 - 3  

2006-433  

50 (2x25)

1 - 4  

2006-434  

50 (2x25)

1 - 5  

2006-435  

50 (2x25)

Protective warning marker, 

with high-voltage symbol, 

for 5 terminal blocks 
yellow  

2006-115  

100 (4x25)

Test plug adapter,

 for test plug 4 mm Ø 

 2009-174 

 

100 (4x25)

Testing tap, 

for max. 2.5 mm

2

/AWG 14

2009-182  

100 (4x25)

Banana plugs, 

only for safety extra-low voltage (42 V)

black 

215-311 

    50

red 

215-212 

    50

blue 

215-711 

    50

2-cond. fuse term. block for mini-automotive fuses, 
12 V, 

with blown fuse indication by LED, 

with test option, gray

Circuit I 

2006-1681/1000-429

 

25

Circuit II 

2006-1681/1000-449

 

25

without blown-fuse indication, with test option

gray  

2006-1681

 

25

End and intermediate plate, 

1 mm thick 

orange  

2006-1692 

100 (4x25)

gray  

2006-1691 

100 (4x25)

Push-in type jumper bar, 

insulated, I

N

 41 A, light gray

2-way  

2006-402  

50 (2x25)

3-way  

2006-403  

50 (2x25)

4-way  

2006-404  

50 (2x25)

5-way  

2006-405  

50 (2x25)

Push-in type jumper bar, 

insulated, I

N

 41 A, light gray

1 - 3  

2006-433  

50 (2x25)

1 - 4  

2006-434  

50 (2x25)

1 - 5  

2006-435  

50 (2x25)

Disconnect plug for fuse terminal blocks, 

suitable 

when using the fuse terminal block 
as a disconnect terminal block
 

orange 

2006-401  

100 (4x25) 

Blade-style fuses,  

acc. to DIN 72581-3c/ISO 8820  

(not offered by WAGO) 

Overcurrent circuit breaker*, 

thermal 

not offered by WAGO 

Push-in type jumper bar, 

insulated, I

N

 41 A, light gray

2-way  

2006-402  

50 (2x25)

Protective warning marker, 

with high-voltage symbol, 

for 5 terminal blocks 
yellow  

2006-115  

100 (4x25)

WMB Multi marking system, 

10 strips with 10 markers per card, 
stretchable 5 – 5.2 mm
plain 

793-5501

  50 (10x5)

Insulated ferrules,

 extra long, 

for TOPJOB

®

S terminal blocks, 

see page 195

Operating tool with partially insulated shaft, 

type 3, (5.5 x 0.8) mm blade

210-721 

     1 

*Recommended overcurrent circuit breaker from ETA, 
Elektrotechnische Apparate GmbH, Postfach 1061, 
D-90514 Altdorf/Nürnberg 
Types 1170-02, 1621-21 or 1610-22, individual or 
block arrangement up to 25 A for conductor size 4 mm

2

/

AWG 12

 

0.2 

- 6 (10) mm

2 

1

  AWG 20 - 8 

800 V/8 kV/3 

2

I

N

 25/30 A 

2

Terminal block width 7.5 mm / 0.295 in 

L

   13 - 15 mm / 0.55 in

1

  

Conductor sizes: 0.25 – 4 mm

2

 “s + f-st”; 

Push-in conductor sizes: 0.75 – 4 mm

2

 “s” and 

0.75 – 2.5 mm

2

 “insulated ferrule, 12 mm”

3 

Approvals

3 

Approvals

3 

Approvals

0.5 

- 6 (10) mm

2 

1

  AWG 20 - 8 

500 V/6 kV/3 

I

N

 30 A 

Terminal block width 15 mm / 0.59 in 

L

   13 - 15 mm / 0.55 in

Ground conductor disconnect terminal block, 

gray 

  24 V AC/DC  

2006-1671/1000-848

 

12 

  48 V AC/DC  

2006-1671/1000-849 

12 

120 V AC/DC  

2006-1671/1000-850

 

12 

230 V AC/DC  

2006-1671/1000-851

 

12 

For application notes, 

see page 83.

End and intermediate plate, 

1 mm thick 

orange  

2006-1692 

100 (4x25)

gray  

2006-1691 

100 (4x25)

2 

Nominal voltage and current are given by the fuse or blown fuse indicator!

3

 Approvals are available online at: www.wago.com.

Circuit I

Circuit II

1

41

<_____________

 108 mm/4.25 in 

_____________>

(

 42 mm/1.65 in 

)

<

 47,5 mm/1.87 in 

>

S

<_____________

 108 mm/4.25 in 

_____________>

(

 42 mm/1.65 in 

)

<

 47,5 mm/1.87 in 

>

<_____________

 108 mm/4.25 in 

_____________>

(

 42 mm/1.65 in 

)

<

 47,5 mm/1.87 in 

>

12

1

Item-Specific Accessories

0.25

 - 2.5 (4) mm

2 

1

 

AWG 22 - 12

400 V/6 kV/3  

I

N

 16 A 

Terminal block width 5.2 mm / 0.205 in

L

   10 - 12 mm / 0.43 in

4-conductor, double-deck, double-disconnect termi-
nal block

gray 

2002-2951 

50

blue 

2002-2954 

50

gray N/L 

2002-2952 

50

0.25

 - 2.5 (4) mm

2 

1

 

AWG 22 - 12

400 V/6 kV/3  

I

N

 16 A 

Terminal block width 5.2 mm / 0.205 in

L

   10 - 12 mm / 0.43 in

TOPJOB

®

@

Double-Deck Disconnect Terminal Blocks 2.5 (4) mm

2

2002 Series

 

End and intermediate plate, 

1 mm thick

orange 

2002-2992 

100 (4x25)

gray 

2002-2991 

100 (4x25)

End and intermediate plate, 

1 mm thick

orange 

2002-2992 

100 (4x25)

gray 

2002-2991 

100 (4x25)

End and intermediate plate, 

1 mm thick

orange 

2002-2992 

100 (4x25)

gray 

2002-2991 

100 (4x25)

4-conductor, double-deck, double-disconnect termi-
nal block, 

lower and upper decks internally commoned 

on right side and with violet marking

gray 

2002-2958 

50

blue 

2002-2959 

50

0.25

 - 2.5 (4) mm

2 

1

 

AWG 22 - 12

400 V/6 kV/3  

I

N

 16 A 

Terminal block width 5.2 mm / 0.205 in

L

   10 - 12 mm / 0.43 in

4-conductor, double-deck disconnect terminal block,  

same profile as double-deck, double-disconnect terminal 
blocks

gray 

2002-2971 

50

blue 

2002-2974 

50

gray N/L 

2002-2972 

50

Color 

Item No. 

Pack. Unit

Color 

Item No. 

Pack. Unit

Color 

Item No. 

Pack. Unit

3 

Approvals

3 

Approvals

3 

Approvals

2002 Series Accessories 

Appropriate marking systems: 

WMB/Marking Strips/WMB Inline

 

Push-in type jumper bar, 

insulated, I

N

 25 A, light gray

 

 2-way 

2002-402  

200 (8x25)

 

 3-way 

2002-403  

200 (8x25)

 

 4-way 

2002-404  

200 (8x25)

 

 5-way 

2002-405  

100 (4x25)

    : 

     

:

10-way 

2002-410  

100 (4x25)

Push-in type jumper bar, 

insulated, I

N

 25 A, light gray

1 -   3 

2002-433  

200 (8x25)

1 -   4 

2002-434  

200 (8x25)

1 -   5 

2002-435  

100 (4x25)

       : 

     

:

1 - 10 

2002-440  

100 (4x25)

Insulation stop,

 5 pcs/strip

 

200 strips

light gray 

2002-171 

0.25–0.5 mm

2

dark gray 

2002-172 

0.75–1 mm

2

TOPJOB

®

S connector, 

modular, 

for jumper contact slot
gray 

2002-511  

100 (4x25)

Spacer module

gray

 2002-549 

 

100 (4x25)

Operating tool with partially insulated shaft, 

type 2, (3.5 x 0.5) mm blade

210-720 

      1 

Marking strips,

 plain 

11 mm wide, 
50m roll
white 

2009-110

       1

Push-in type jumper bar, 

insulated, I

N

 25 A, light gray

 

 2-way 

2002-402  

200 (8x25)

 

 3-way 

2002-403  

200 (8x25)

 

 4-way 

2002-404  

200 (8x25)

 

 5-way 

2002-405  

100 (4x25)

    : 

     

:

10-way 

2002-410  

100 (4x25)

Staggered jumper, 

insulated, I

N

 25 A, light gray

 

 2-way  

2002-472  

100 (4x25)

 

 3-way  

2002-473  

100 (4x25)

 

 4-way  

2002-474  

100 (4x25)

 

 5-way  

2002-475  

50 (2x25)

    :  

   

: 

12-way  

2002-482  

50 (2x25)

Insulation stop,

 5 pcs/strip

 

200 strips

light gray 

2002-171 

0.25–0.5 mm

2

dark gray 

2002-172 

0.75–1 mm

2

TOPJOB

®

S connector, 

modular, 

for jumper contact slot
gray 

2002-511  

100 (4x25)

Spacer module

gray

 2002-549 

 

100 (4x25)

Banana plugs, 

only for safety extra-low voltage (42 V)

black 

215-311 

   50

red 

215-212 

   50

blue 

215-711 

   50

Push-in type jumper bar, 

insulated, I

N

 25 A, light gray

 

 2-way 

2002-402 

200 (8x25)

 

 3-way 

2002-403 

200 (8x25)

 

 4-way 

2002-404 

200 (8x25)

 

 5-way 

2002-405 

100 (4x25)

    : 

     

:

10-way 

2002-410 

100 (4x25)

Push-in type jumper bar, 

insulated, I

N

 25 A, light gray

1 -   3 

2002-433 

200 (8x25)

1 -   4 

2002-434 

200 (8x25)

1 -   5 

2002-435 

100 (4x25)

       : 

     

:

1 - 10 

2002-440 

100 (4x25)

Insulation stop,

 5 pcs/strip

 

200 strips

light gray 

2002-171 

0.25–0.5 mm

2

dark gray 

2002-172 

0.75–1 mm

2

TOPJOB

®

S connector, 

modular, 

for jumper contact slot
gray 

2002-511 

100 (4x25)

Spacer module

gray

 2002-549 

100 (4x25)

Test plug adapter,

 for test plug 4 mm Ø 

 2009-174 

100 (4x25)

Testing tap, 

for max. 2.5 mm

2

/AWG 14

2009-182 

100 (4x25)

Protective warning marker, 

with high-voltage symbol, 

for 5 terminal blocks
yellow 

2002-115 

100 (4x25)

Ex e II approvals (pending)

For technical explanations and abbreviations, see technical section. 

Additional information at www.wago.com.

1

  Conductor sizes: 0.25 – 4 mm

2

 “s + f-st”; 

Push-in conductor sizes: 0.75 – 4 mm

2

 “s” and 0.75 – 2.5 mm

2

 “insulated ferrule, 12 mm”

1

 42

<_________

 70 mm/2.76 in 

_________>

<_

_

 33 mm

/  

___>

           1.3 in

<___

 48,5 mm/1.91 in 

___>

<_

_

 33 mm

/  

___>

           1.3 in

<_____

 59,5 mm/2.34 in 

______>

<_

_

 33 mm

/  

___>

           1.3 in

12

Item No.  

Pack. Unit 

Item No.  

Pack. Unit 

Item No.  

Pack. Unit 

1

  Conductor sizes: 0.25 – 4 mm

2

 “s + f-st”; 

Push-in conductor sizes: 0.75 – 4 mm

2

 “s” and 

0.75 – 2.5 mm

2

 “insulated ferrule, 12 mm”

TOPJOB

®

@

Diode Terminal Blocks and LED Terminal Blocks 2.5 (4) mm

2

2002 Series 

0.25 

- 2.5 (4) mm

2  

1

 

AWG 22 - 12 

V

N

 250 V; V

RM

 1000 V 

1N4007 – 0.5 A continuous current 

Terminal block width 5.2 mm / 0.205 in 

L

   10 - 12 mm / 0.43 in

0.25 

- 2.5 (4) mm

2  

1

 

AWG 22 - 12 

2

  

U

N

 250 V; U

RM

 1000 V  

1N4007 – 0.5 A continuous current 

3

  

24 VDC / I

F 

0.025 A max. 

Terminal block width 5.2 mm / 0.205 in 

L

   10 - 12 mm / 0.43 in

0.25 

- 2.5 (4) mm

2  

1

 

AWG 22 - 12 

2

  

U

N

 250 V; U

RM

 1000 V  

1N4007 – 0.5 A continuous current 

3

  

24 VDC / I

F 

0.025 A max. 

Terminal block width 5.2 mm / 0.205 in 

L

   10 - 12 mm / 0.43 in

2-conductor diode termi-
nal block with 1N 4007 
diode

2002-1211/1000-410 

100

2-conductor diode termi-
nal block with 1N 4007 
diode

2002-1211/1000-411 

100

Through terminal block 
of same profile

2002-1201 

100

2 

4-conductor diode ter-

minal block with 1N4007 
diode

2002-1411/1000-410 

100

2 

4-conductor diode ter-

minal block with 1N4007 
diode

2002-1411/1000-411 

100

3 

4-conductor LED ter-

minal block with red LED, 
24 VDC

2002-1421/1000-434 

100

3 

4-conductor LED ter-

minal block with red LED, 
24 VDC

2002-1421/1000-413 

100

Through terminal block 
of same profile

2002-1401 

100

2

 3-conductor diode ter-

minal block with 1N4007 
diode

2002-1311/1000-410 

100

2

 3-conductor diode ter-

minal block with 1N4007 
diode

2002-1311/1000-411 

100

3

 3-conductor LED termi-

nal block with red LED, 
24 VDC

2002-1321/1000-434 

100

3

 3-conductor LED termi-

nal block with red LED, 
24 VDC

2002-1321/1000-413 

100

Through terminal block 
of same profile

2002-1301 

100

2002 Series Accessories

 

Appropriate marking systems: 

WMB/Marking Strips/WMB Inline

Item-Specific Accessories

End and intermediate plate, 

0.8 mm thick

orange 

2002-1292 

100 (4x25)

gray 

2002-1291 

100 (4x25)

End and intermediate plate, 

0.8 mm thick

orange 

2002-1392 

100 (4x25)

gray 

2002-1391 

100 (4x25)

End and intermediate plate, 

0.8 mm thick

orange 

2002-1492 

100 (4x25)

gray 

2002-1491 

100 (4x25)

Push-in type jumper bars, 

light gray, insulated, I

N

 25 A 

  2-way  

2002-402 

200 (8x25)

  3-way  

2002-403 

200 (8x25)

  4-way  

2002-404 

200 (8x25)

  5-way  

2002-405 

100 (4x25)

    :  

   

: 

10-way  

2002-410 

100 (4x25)

Push-in type jumper bars, 

light gray, insulated, I

N

 25 A 

1 -   3  

2002-433 

200 (8x25)

1 -   4  

2002-434 

200 (8x25)

1 -   5  

2002-435 

100 (4x25)

       :  

   

: 

1 - 10  

2002-440 

100 (4x25)

Staggered jumper, 

light gray, insulated, I

N

 25 A 

  2-way  

2002-472  

100 (4x25)

  3-way  

2002-473  

100 (4x25)

  4-way  

2002-474  

100 (4x25)

  5-way  

2002-475  

50 (2x25)

    :  

   

: 

12-way  

2002-482  

50 (2x25)

2

 Approvals are available online at: www.wago.com. 

For technical explanations and abbreviations, see technical section.

4 

Approvals

4 

Approvals

4 

Approvals

1

43

S

<_____

 70 mm/2.76 in 

______>

<_

 52 mm/2.04 in 

__>

<_________

 93,5 mm/3.68 in 

_________>

<___

_

 69,5 mm/2.74 in 

___>

I

I

I

I

I

I

II

II

II

II

II

II

1

12

Item No.  

Pack. Unit 

Item No.  

Pack. Unit 

Item No.  

Pack. Unit 

1

  Conductor sizes: 0.25 – 4 mm

2

 “s + f-st”; 

Push-in conductor sizes: 0.75 – 4 mm

2

 “s” and 

0.75 – 2.5 mm

2

 “insulated ferrule, 12 mm”

TOPJOB

®

@

Double- and Triple-Deck Diode Terminal Blocks 

Double- and Triple-Deck LED Terminal Blocks, 2.5 (4) mm

2

, 2002 Series 

Double-deck diode terminal 
block 

with 1N4007 diode (I)

2002-2211/1000-410 

50

with 1N4007 diode (II)

2002-2211/1000-411 

50

Double-deck diode terminal 
block 

with 2 1N4007 diodes (I)

2002-2214/1000-492 

50

with 2 1N4007 diodes (II)

2002-2214/1000-491 

50

Double-deck diode terminal 
block 

with 2 1N4007 diodes (I)

2002-2213/1000-487 

50

with 2 1N4007 diodes (II)

2002-2213/1000-488 

50

Double-deck diode terminal 
block 

with 2 1N4007 diodes (I)

2002-2214/1000-489 

50

with 2 1N4007 diodes (II)

2002-2214/1000-490 

50

Through terminal block 
of same profile

2002-2201 

100

Double-deck diode terminal 
block with red LED, 

24 VDC

2002-2221/1000-434 

50

Double-deck diode terminal 
block with red LED, 

24 VDC

2002-2221/1000-413 

50

Triple-deck diode terminal 
block with red LED,  

24 VDC

2002-3221/1000-434 

50

Triple-deck diode terminal 
block with red LED,  

24 VDC

2002-3221/1000-413 

50

Triple-deck diode termi-
nal block 

with 1N4007 

diode (I)

2002-3211/1000-410 

50

with 3 1N4007 diodes (II)

2002-3212/1000-673 

50

Triple-deck diode terminal 
block 

with 1N4007 diode (I)

2002-3211/1000-411 

50

with 3 1N4007 diodes (II)

2002-3212/1000-674 

50

Triple-deck diode terminal 
block 

with 1N4007 diode

2002-3211/1000-675 

50

Triple-deck diode terminal 
block 

with 1N4007 diode

2002-3211/1000-676 

50

Through terminal block 
of same profile

2002-3201 

100

2002 Series Accessories

 

Appropriate marking system:

 WMB/WMB Inline

Item-Specific Accessories

End and intermediate plate, 

0.8 mm thick

orange 

2002-2292 

100 (4x25)

gray 

2002-2291 

100 (4x25)

End and intermediate plate, 

0.8 mm thick

orange 

2002-3292 

100 (4x25)

gray 

2002-3291 

100 (4x25)

Through terminal block with same profile

Double-deck terminal block 

2002-2201

Triple-deck terminal block 

2002-3201

End and intermediate plate, 

0.8 mm thick

orange 

gray

Double-deck terminal block 

2002-2292 2002-2291

Triple-deck terminal block 

2002-3292 2002-3291

Insulation stop,

 5 pcs/strip 

 

200 strips 

light gray  

2002-171 

0.25–0.5 mm

2 

dark gray  

2002-172 

0.75–1 mm

2 

Insulated ferrules,

 extra long, 

for TOPJOB

®

S terminal blocks, 

see page 195

Test plug adapter,

 for test plug 4 mm Ø 

 2009-174 

 

100 (4x25)

Testing tap, 

for max. 2.5 mm

2

/AWG 14

2009-182  

100 (4x25)

Banana plugs, 

only for safety extra-low voltage (42 V)

black 

215-311 

   50

red 

215-212 

   50

blue 

215-711 

   50

Operating tool with partially insulated shaft, 

type 2, (3.5 x 0.5) mm blade

210-720 

     1

WMB Multi marking system, 

10 strips with 10 markers per card, 
stretchable 5 – 5.2 mm
plain 

793-5501

  50 (10x5)

0.25 

- 2.5 (4) mm

2  

1

 

AWG 22 - 12 

24 VDC 
I

F

 25 mA max. 

Terminal block width 5.2 mm / 0.205 in 

L

   10 - 12 mm / 0.43 in

0.25 

- 2.5 (4) mm

2  

1

  

AWG 22 - 12 

V

N

 250 V; V

RM

 1000 V 

1N4007 – 0.5 A continuous current 
Terminal block width 5.2 mm / 0.205 in 

L

   10 - 12 mm / 0.43 in

0.25 

- 2.5 (4) mm

2  

1

 

AWG 22 - 12 

V

N

 250 V; V

RM

 1000 V 

1N4007 – 0.5 A continuous current 
Terminal block width 5.2 mm / 0.205 in 

L

   10 - 12 mm / 0.43 in

Please find the entire product range in our Full Line Catalog, Volume 1. Additional information at www.wago.com.

4 

Approvals

4 

Approvals

4 

Approvals

1

 44

X-COM

®

@

 SYSTEM 

Description and Handling, 2020 and 2022 Series 

Marking terminal blocks via marking strips or WMB Multi 

markers.

Commoning carrier terminal blocks via staggered jumper.  

Push jumper down until fully inserted!

Commoning carrier terminal blocks via push-in type wire 

jumper.

Assembly

CAGE CLAMP

®

 connection 

Removal

Snap individual carrier terminal blocks onto carrier rail 

and engage.

Coding

Coding a female plug: remove coding finger using a suit-

able tool.

Coding

Insert 2022-100 coding pin into the corresponding loca-

tion of the carrier terminal block.

Marking

Commoning 

Unlock assembly with screwdriver (3.5 x 0.5 mm) and 

remove terminal block via release lever.

Carrier terminal block: inserting/removing conductor via 

screwdriver (3.5 x 0.5 mm).

stranded

fine-stranded

tip bonded

with ferrule

with pin terminal

CAGE CLAMP

®

S clamps the following copper conductors:

solid
Strip length, see packaging or instructions.

1

45

48,5 mm/1.91 in

28,6 mm/1.13 in

32,5 mm/ 1.28 in

<__

 48,5 mm/1.91 in 

____>

 28,6 mm/1.13 in 

  

<__

 2

8,5 mm

/  

___>

           1.12 in

S

1

Derating curves available upon request

X-COM

®

@

 SYSTEM 

Carrier Terminal Blocks and Female Plugs 

2020 and 2022 Series 

0.14 

- 1 (1.5) mm

2 

1

  AWG 24 - 16

500 V/6 kV/3

I

N

 13.5 A 

3

 

Terminal block width 3.5 mm / 0.138 in 

L

   9 - 11 mm / 0.39 in

0.25 

- 2.5 (4) mm

2 

2

  AWG 22 - 12 

690 V/6 kV/3

I

N

 24 A (32 A ) 

3

 

Terminal block width 5.2 mm / 0.205 in 

L

   10 - 12 mm / 0.43 in

1-conductor/1-pin carrier terminal block, 

suitable for DIN 35 rail acc. to EN 60715 

gray 

2020-1201

 

  50

blue 

2020-1204

 

  50

1-conductor/1-pin ground carrier terminal block

green-yellow 

2020-1207

 

  50

2-conductor/2-pin carrier terminal block, 

gray 

2020-1401

 

  50

blue 

2020-1404

 

  50

2-conductor/2-pin ground carrier terminal block

green-yellow 

2020-1407

 

  50

End and intermediate plate, 

1 mm thick, for 1-conduc-

tor / 1-pin carrier terminal block
gray 

2020-1291 

100 (4x25)

orange 

2020-1292 

100 (4x25)

End and intermediate plate, 

1 mm thick, for 2-conduc-

tor / 2-pin carrier terminal block
gray 

2020-1491 

100 (4x25)

orange 

2020-1492 

100 (4x25)

1-conductor/1-pin carrier terminal block, 

suitable for DIN 35 rail acc. to EN 60715 

gray 

2022-1201

 100

blue 

2022-1204

 100

1-conductor/1-pin ground carrier terminal block

green-yellow 

2022-1207

 100

2-conductor/1-pin carrier terminal block, 

gray 

2022-1301

 100

blue 

2022-1304

 100

2-conductor/1-pin ground carrier terminal block

green-yellow 

2022-1307

 100

2-conductor/2-pin carrier terminal block, 

gray 

2022-1401

 

  50

blue 

2022-1404

 

  50

2-conductor/2-pin ground carrier terminal block

green-yellow 

2022-1407

 

  50

End and intermediate plate, 

1 mm thick, for 1-conduc-

tor / 1-pin carrier terminal block
gray 

2022-1291 

100 (4x25)

orange 

2022-1292 

100 (4x25)

End and intermediate plate, 

1 mm thick, for 2-conduc-

tor / 1-pin carrier terminal block
gray 

2022-1391 

100 (4x25)

orange 

2022-1392 

100 (4x25)

End and intermediate plate, 

1 mm thick, for 2-conduc-

tor / 2-pin carrier terminal block
gray 

2022-1491 

100 (4x25)

orange 

2022-1492 

100 (4x25)

Color 

Item No.  

Pack. Unit 

Color 

Item No.  

Pack. Unit 

Double-deck terminal blocks, 2020 and 2022 Series

1-conductor female plug on 1-conductor/1-pin carrier 

terminal block

2-conductor female plugs on 2-conductor/2-pin carrier 

terminal block

4 

Approvals

4 

Approvals

1-conductor female plug with CAGE CLAMPS, 

with coding fingers, gray

  1-pole  

2022-101

 200

  2-pole  

2022-102

 100

  3-pole  

2022-103

 50

    :  

        

:

14-pole 

 2022-114 

10

15-pole 

 2022-115 

10

Carrier with 6 coding pins,

 

for coding of female plugs
orange 

2022-100

 100 (4x25)

1-conductor female plug with CAGE CLAMPS, 

with coding fingers, gray

  2-pole  

2020-102

 100

  3-pole  

2020-103

 50

  4-pole  

2020-104

 50

    :  

        

:

14-pole 

 2020-114 

10

15-pole 

 2020-115 

10

Carrier with 6 coding pins,

 

for coding of female plugs
orange 

2020-100

 100 (4x25)

2020 Series Accessories

 (see 2000 Series)

2022 Series Accessories

 (see 2002 Series)

Item-Specific Accessories

Item-Specific Accessories

Conductor sizes: 0.14 – 1.5 mm

2

 “s + f-st”; 

Push-in conductor sizes: 0.5 – 1.5 mm

2

 “s” and 

0.5 – 0.75 mm

2

 “insulated ferrule, 10 mm”

Conductor sizes: 0.25 – 4 mm

2

 “s + f-st”; 

Push-in conductor sizes: 0.75 – 4 mm

2

 “s” and 

0.75 – 2.5 mm

2

 “insulated ferrule, 12 mm”

Approvals are available online at:  
www.wago.com.

Additional poles and/or mixed (gray/blue/green-yellow) female plugs upon request

1

2

3

4

1

 46

4-Conductor, Chassis-Mount Terminal Strips

Description and Handling, 862 Series

Conductor termination 

Testing

Marking

Marking

Direct, one-side printing

Marking strips

Testing  

with test plug 2 mm Ø.

Four conductors per pole for solid and fine-stranded 

conductors.

Makes an automatic contact to the mounting plate. The 

varnish coating is penetrated automatically.

Cost-effective features:

CAGE CLAMP

®

S clamps the following copper conductors:

The 862 Series chassis-mount terminal strips were developed specifically to 

minimize wiring costs

, while accommodating requirements for 

easy mounting, multiple connection points, marking and handling:

•

The 862 Series equipped with CAGE CLAMP

®

S connects up to four conductors sized 0.5 mm² to 4 mm² (AWG 20–12).

Due to multiple connection points per pole, different conductor sizes can be used within the same terminal block position.

•

CAGE CLAMP

®

S termination technology allows solid conductors, fine-stranded conductors with ferrules or ultrasonically bonded conductors

from 0.5 mm² to 4 mm² (AWG 20–12) to be connected by simply pushing the conductor into contact. 

(Length of bonded wire end min. 10 mm/0.39 in).

•

Convenient automatic grounding contact available as an option.

•

Snap-in mounting feet for fast assembly.

•

Push-buttons for easy handling with an operating tool or by hand.

•

Built-in test points simplify testing with test plug 2 mm Ø.

•

Flexible marking options with standard marking (pre-marked), marker strip or custom marked for large quantity orders.

stranded

fine-stranded

tip bonded

with ferrule

solid

Commoning with comb-style jumper bar.

Ground contact (PE contact)

Commoning

Strip length, see packaging or instructions.