Description
1201 Glyptal Red Enamel Insulating Paint, Glyptal 1201 seals the rough interior castings of engine blocks to help prevent engine damage. Sealing the tiny pores left in metal after bead blasting leaves the engine block interior smooth and clean, and that helps keep oil clean and flowing freely.
The Glyptal 1201 is a red, alkyd resin enamel paint that comes in a 1 gal pail. The general purpose paint can be thinned for spray applications and works well as a sealer for screws, pipes, and hydraulic fluid chambers
Glyptal 1201 Features:
Resin Type: Alkyd Enamel
Color: Red
Primary Color: Red
Finish: Low Gloss
Dry Time: 2h
Application Method: Brush, Spray, Dip
Container Type: Pail
Container Size: 1gal
Resistance Properties: Water Resistant, Heat Resistant, Arc Resistant, Chemical Resistant
Quick-Drying (Yes/No): Yes
VOCs Content: 3.98lb/gal
Applications: Treatment of Coils And Armatures, Internal Coatings for Engines, General Plant Maintenance, Primer and Finish for Motor, Generator and Transfer Housings, Anti-Moisture Coating on Thermostat, Water Cooler, and Truck Control Parts, Sealer for Pipe and Stud
Glyptal 1201 Specifications:
Meets requirements of MIL-E-22118
Flexibility is far superior to competitive red sealers on both backed and air-dried films. 1201 can take rugged impact
Water Resistance is excellent
Prolonged aging doesn’t crack 1201’s film, leaves no place for destructive agents to get in
Fast drying 1201 is tack-free in about 30 minutes at room temperature, can be baked to a beautiful smooth finish
Heat Resistance. 1201 has got it, can withstand continuous 135C temperature for months
Prolonged Heat. After 3700 hours at 35C, there is no change in dielectric strength
Toughness. High-gloss paints have a tender film. 1201 has a low-gloss finish, designed for great resistance to abrasion
Adhesion. 1201 hangs on, stays where it’s put-on metals, ceramic, porcelain, concrete, fibers and wood
Dielectric strength is rated at 1500 volts per mil, permits thinner coating than most competitive paints
Arc Resistance, even with air-dried films, is 480 seconds
Manufacturer Part Number: GLY1201G
Manufacturer: Electronic Components
