Description
ESB201 is designed to withstand high inrush current during the period of time that the inrush current is generated by the switching mode powersupplies or the LED drivers. The inrush current limiter can withstand nominal continuous current of max. 16A. Total nominal primary current of each powersupply or LED driver combined cannot exceed 16A.
Model ESB201.LED.115Vac
Limiting Peak current 43A for Ton=500ms
Limiting RMS-value 30,4A for Ton=500ms
Limiting Cycle Interval 900ms (3x/minute)
Low Voltage Detection Toff=550ms
Input Voltage 90… 130Vac 16 1/3… 440Hz 1PH
Nominal voltage 110… 120Vac
AC Continuous Current 16A
Load capacity 10000uF
Connectors Spring-type-terminal 0,5… 6mm²
Ambient Opearting Temperature -20°C… +45°C no derating
Cooling Natural convection
Dimensions (WxHxD) 35,4 x 23,5 x 260mm
Special Features Temperature protected (fuse)
Safety covered terminals against electrical shock
Fire protected
Accuracy ±6%, independent from ambient temperature
Ballast and capacitive loads
Bypass circuit
4000m / 13123 ft. above sea level
Manufacturer:Camtec
Datasheet:camtec_esb201_e0214b.pdf
