Description
Fair-Rite 2506036007Z0 Multi-Layer Ferrite Bead 60 Ohm 25% 100 MHz 450mA SMD 0603
Ferrite Chip Beads
Suppress EMI in a wide variety of devices such as computers, cellular phones, digital communication equipment, televisions, pagers, and VCRs
Low current, medium current, and high current chip beads are available. These chip beads are controlled 100% for impedance and DCR. They are suitable for both wave and reflow solder processes
Standard speed signal chip beads are designed for general noise suppression over a wide frequency range
High speed signal chip beads offer low impedance at frequencies below 100MHz and the impedance increases rapidly to its peak at >500MHz
A Chip Bead Engineering Kit (466-8896) is available for prototype evaluation
+ Test frequency
| Typical Impedance (Ω) | |
| 50 MHz | 28 |
| 100 MHz+ | 60 ±25% |
| 500 MHz | 145 |
| 1000 MHz+ | – |
| Electrical Properties | |
| Max DCR (?) |
0.25 |
| Max Current (mA) |
450 |
The impedance values listed are typical values. The nominal impedance with a +/- 25% tolerance is specified for the + marked 100 MHz. Chip beads are measured for impedance on the HP 4291A and fixture HP 16192A.
Chip beads are 100% tested for impedance and dc resistance.
Manufacturer:Fair-Rite
Datasheet:Fair-Rite/2506036007Z0.pdf
