Description
Analog Devices Inc. HMC625HFLP5ETR ADI IC MMIC AMP VGA 6BIT SPI 32QFN RoHS
- -13.5 to +18 Gain Control in 0.5 dB Steps
- Power-up State Selection
- High Output IP 3: +33 dBm
- TTL /CMOS Compatible
- Serial, Parallel, or latched Parallel Control
- ±0.25 dB Typical Gain Step Error
- Single +5V Supply
- 32 Lead 5 x 5 mm SMT Package: 25 mm2
APPLICATION
- Cellular/3G Infrastructure
- WiBro / WiMAX / 4G
- Microwave Radio & VSAT
- Test Equipment and Sensors
- IF & RF Applications
| Specifications | |
| Amplifier Type | Power Amplifier |
| Applications | RF Microwave |
| RoHS Compliant | RoHS |
| Frequency Range | 500 to 6000 MHz |
| Minimum Gain | 5 dB |
| Package Type | 5 X 5 MM, ROHS COMPLIANT, LEADLESS, PLASTIC, SMT, QFN-32 |
| Nominal Impedance | 50 |
| Operating Temperature | -40 to 85 C (-40 to 185 F) |
Packaging Tape & Reel (TR)
Frequency 500MHz ~ 6GHz
P1dB 19dBm
Gain 18dB
RF Type VSAT
Voltage – Supply 5V
Current – Supply 86mA
Test Frequency –
Package / Case 32-VFQFN Exposed Pad
Supplier Device Package 32-QFN (5×5)
The HMC625HFLP 5E is a digitally controlled variable gain amplifier which operates from 0.5 – 6 GHz, and can be programmed to provide anywhere from 13.5 dB attenuation, to 18 dB of gain, in 0.5 dB steps. The HMC625HFLP 5E delivers noise figure of 6 dB in its maximum gain state, with output IP 3 of up to +33 dBm in any state. The dual mode control interface is CMOS/ TTL compatible, and accepts either a three wire serial input or a 6 bit parallel word. The HMC625HFLP 5E also features a user selectable power up state and a serial output port for cascading other Hittite serial controlled components. The HMC625HFLP 5E is housed in a RoHS compliant 5 x 5 mm QFN leadless package, and requires no external matching components.
The HMC625HFLP is a digitally controlled variable gain amplifier which operates from – 6 GHz, and can be programmed to provide anywhere from 13.5 dB attenuation, dB of gain, 0.5 dB steps. The HMC625HFLP5E delivers noise figure dB in its maximum gain state, with output to +33 dBm in any state. The dual mode control interface is CMOS/ TTL compatible, and accepts either a three wire serial input a 6 bit parallel word. The HMC625HFLP5E also features a user selectable power up state and a serial output port for cascading other Hittite serial controlled components. The HMC625HFLP5E is housed in a RoHS compliant 5 mm QFN leadless package, and requires no external matching components.
Parameter Frequency Range Gain (Maximum Gain State) Gain Control Range Input Return Loss Output Return Loss Gain Accuracy: (Referenced to Maximum Gain State) All Gain States Output Power for 1 dB Compression Output Third Order Intercept Point (Two-Tone Output Power= 12 dBm Each Tone) Noise Figure (Max Gain State) Switching Characteristics tRISE, tFall / 90% RF) 60 tON, tOFF (Latch Enable / 90% RF) Supply Current (Amplifier) Supply Current (Controller) Idd 13 Min. Typ. of relative gain setting) Max Max. Min. Typ. of relative gain setting) Max Max. Min. Typ. of relative gain setting) Max Max. Units MHz dB
Manufacturer:Analog Devices
Datasheet:hmc625.pdf
