Description
MT25QL128ABA1ESE-0SIT Micron NOR Flash Serial-SPI 3.3V 128Mbit 128M x 1bit 8-Pin SOP-II
The MT25Q is a high-performance multiple input/output serial Flash memory device manufactured on 45nm NOR technology. It features a high-speed SPI-compatible bus interface, execute-in-place (XIP) functionality, advanced write protection mechanisms, and extended address access. Innovative, high-performance, dual and quad input/ output commands enable double or quadruple the transfer bandwidth for READ and PROGRAM operations.
Key Features
SPI-compatible serial bus interface
Single and double transfer rate (STR/DTR)
Clock frequency
133 MHz (MAX) for all protocols in STR
66 MHz (MAX) for all protocols in DTR
Dual/quad I/O commands for increased throughput up to 65 MB/s
Supported protocols in both STR and DTR
Extended I/O protocol
Dual I/O protocol
Quad I/O protocol
Execute-in-place (XIP)
PROGRAM/ERASE SUSPEND operations
Volatile and nonvolatile configuration settings
Software reset
Additional reset pin for selected part numbers
3-byte and 4-byte address modes — enable memory access beyond 128Mb
Dedicated 64-byte OTP area outside main memory
Readable and user-lockable
Permanent lock with PROGRAM OTP command
Erase capability
Bulk erase
Sector erase 64KB uniform granularity
Subsector erase 4KB, 32KB granularity
Security and write protection
Volatile and nonvolatile locking and software write protection for each 64KB sector
Nonvolatile configuration locking
Password protection
Hardware write protection: nonvolatile bits (BP[3:0] and TB) define protected area size
Program/erase protection during power-up
CRC detects accidental changes to raw data
Electronic signature
JEDEC-standard 3-byte signature (BA20h)
Extended device ID: two additional bytes identify device factory options
JESD47H-compliant
Minimum 100,000 ERASE cycles per sector
Data retention: 20 years (TYP)
Technical Attributes
Description Value Find similar Parts
ECC Support No
Program Current 60 mA
Sector Size 64 x 256 KB
Location Of Boot Block Bottom|Top
Timing Type Synchronous
Number of Words 128 MWords
Typical Operating Supply Voltage 3.3 V
Cell Type NOR
Erase Suspend/Resume Modes Support Yes
Density 128 Mb
Architecture Sectored
Block Organization Symmetrical
Maximum Random Access Time 6 ns
Max Processing Temp 260
Mounting Surface Mount
Page Size 256 byte
Number of Bits per Word 1 Bit
Boot Block Yes
Simultaneous Read/Write Support No
Maximum Programming Time 2.8/Page ms
Support of Common Flash Interface No
Minimum Operating Supply Voltage 2.7 V
Support of Page Mode No
Operating Temperature -40 to 85C
Maximum Operating Current 22 mA
Maximum Erase Time 460/Chip s
Screening Level Industrial
Interface Type Serial (SPI)
Programming Voltage 2.7 to 3.6 V
Command Compatible Yes
Maximum Operating Supply Voltage 3.6 V
Manufacturer Part Number: MT25QL128ABA1ESE0SIT
Manufacturer: Electronic Components
