Description
S4B-ZR(LF)(SN) JST Wire-To-Board Header Connector, Side Entry, 4 Position 2 mm Pitch Through Hole Shrouded Header
Look no further than the shrouded S4B-ZR (LF)(SN) header connector from JST Corporation, a great tool to use when board-to-board interconnects is required. This HDR connector’s 4 contacts that are made out of brass and plated with tin over copper. Its pitch is 1.5 mm. It has a header type gender. This is a 1-row connector. It has a maximum voltage rating of 50 VDC|50VAC. It has a right angle body orientation. This device has a maximum current rating of 1 A. This connector has an operating temperature of -25 to 85 C. S4B-ZR (LF)(SN) is housed in ivory polyamide 6/6. It uses the solder termination method. This product is 7.5 mm long, 3.7 mm tall and 6 mm deep.
Technical data
Connector type: Pin strip, right angle
Connectors: wire-to-board
Series: ZH
CS: 1.50 mm
Pins per row: 4
Total number of pins: 4
Pin diameter: 0.5 mm
Pin shape: Circular
Nominal current: 1 A
Content: 1 pc(s)
Dim: (L x W x H) 7.5 x 3.5 x 6.4 mm
Colour: Ecru
Height: 6.4 mm
Length: 7.5 mm
Width: 3.5 mm
Industrial packaging: No
Connection: Print
Connector contact surface: Tin plated
Board contact surface: Tin plated
Connector orientation: Parallel (to the PCB)
Manufacturer part #: S4B-ZR (LF)(SN)
Type: S4B-ZR (LF)(SN)
Material (details): PA 66 UL94V-0
Type: Connector pin strip, straight
Insulation material: Polyamide
Nominal voltage (details): 50 V AC
Nominal current (details): 1 A
No. of rows: 1
Cross section: 0.032 – 0.13 mm
Number of pins: 4
Connection: Crimp
Contact material: Phosphor bronze
Case material: Polyamide
RoHS-compliant: Yes
Product type: Built-in pin strip (precision)
Manufacturer: JST
MFG Part #: S4B-ZR(LF)(SN)
