Description
SR-3065 Richco Snap Rivet 0.158″-0.197″ Hold
To fasten the rivet, the end of the shank is impacted, pressed or spun after the rivet has been inserted into a work-piece. A solid head is formed (upset) to create the clinched head of the rivet. When impact or press clinched, the force required to form the clinched head of the rivet swells the entire shank of the rivet to completely fill the work-piece hole. Swelling of the shank occurs most by the clinched head end of the rivet. Spun/orbital/radial rivet clinches require less tonnage to form than impact or pressed rivets; therefore, do not have the same shank swelling capability. Pre-punched or drilled work-piece holes are required for use on most solid rivet applications.
Product Information
- External Diameter 6.4mm
- Overall Length 7.1mm
- External Depth 1.6mm
- Mounting Hole Dia 3.2mm
- Fastener Material Nylon 6 (Polyamide 6)
Richco has been in the foreground of the plastics industry since the mid-20th Century. As innovative designers and manufacturers, Richco specialized in fasteners, circuit board hardware, wire routing products, cable ties, clips, clamps, fiber optics and telecommunication accessories, providing a global presence with local support. Richco, Inc. provided innovative design solutions to meet a wide range of fastening and routing requirements with focused engineering and manufacturing expertise.
Providing innovative design solutions, Richco’s vast array of product offerings addressed specific application needs within electronics, computer, consumer goods, telecom/datacom, and contract manufacturing industries. In addition to their dedication to new product development, they were committed to providing unsurpassed engineering assistance and technical advice in selecting the right component, then delivering them when you need them.
Manufacturer Part Number: SR3065
Manufacturer: Richco
