Description
Advanced Grade Cyanoacrylates
PX Plastics – Extended Performance grades provide maximum strengths for bonding various plastics and elastomerics together or in combination with metals and other materials. Select PX whenever organic materials are to be bonded. Service temperature range -65 degrees F to 200 degrees F, impact strengths, 4-8 lbs/in2. The PX chemistry provides an intermediate grade between the RX and the H1 type product capabilities. Excellent performance on nylon, ABS, PVC, certain fluorocarbons, etc. Will not crack or craze ABS.
| Size | Part # | |||
| PX-5 | INSTANT CURE: Able to penetrate between parts 5 cP viscosity allows up to .002″ gap fill capability Meets MIL-A-46050C Type II Class 1 |
20 gram 1lb. |
FG05070 FG05073 |
|
| PX-50 | FAST CURE: General purpose 50cP viscosity allows up to .004″ gap fill capability Meets MIL-A-46050C Type II Class 1 |
5 gram 20 gram 1lb. |
FG05085 FG05080 FG05083 |
|
| PX-500 | SLOW CURE: Allows work piece alignment 500cP viscosity allows up to .008″ gap fill capability Meets MIL-A-46050C Type II Class 3 |
20 gram 1lb. |
FG05090 FG05093 |
|
| TX-5 | TX Temperature Extended: Single component, high temperature cyanoacrylates for use at service temperatures up to 300 degrees F. Best for wire tacking and component bonding to printed circuit boards before and after wave soldering. TX chemistry is specially designed to permit rapid “wire tacking” to plain printed circuit boards; boards covered with solder masks; and provides the best performance for “tacking” when board processing includes water washing operations. These formulations work well on chromate conversion coatings and oily parts. Excellent impact strengths of 10-15 lbs/in2 can be obtained. | |||
| INSTANT CURE : Able to penetrate between parts 5 cP viscosity allows up to .002″ gap fill capability Meets MIL-A-46050C Type II Class 1 |
20 gram 1lb. |
FG05101 FG05102 |
||
| TX-100 | MEDIUM CURE: Broad use adhesive 100cP viscosity allows up to .004″ gap fill capability Meets MIL-A-46050C Type II Class 2 |
20 gram 1lb. |
FG05511 FG05512 |
|
| TX-750 | SLOW CURE: Allows work piece alignment 750cP viscosity allows up to .010″ gap fill capability Meets MIL-A-46050C Type II Class 3 |
20 gram 1lb. |
FG04504 FG04503 |
|
Manufacturer Part Number: TX-750
Manufacturer: Electronic Components
