Description
Be sure to have a 1A Minimum Power Source
1 Input Characteristics
Volt./Freq
Input Voltage Range :DC6V-4.5V?Power Frequency: 47~63Hz?
Current
When the input Volt is DC5V, the Max power is 800mA?
2 Output Characteristics
Output Voltage?DC4.2V±0.5V
Output Power? 800mA
3 Work Efficiency
In the rated input voltage and rated loading condition, the efficiency (power output/input power) ≥50%.
4 With Circuit Protection Function
With Over current protection function
Over current protection can be guarantee the products won’t damage in flow condition.
5?Charging Indicator:
1 Indicator?Charging showing red light?
2 Full charging and no charging showing green light
1.External Environmental Requirements:
Working Tempt -10?——+45? Store Tempt -25?——+85?
Working
humidity
5%——95% Store humidity 45%——85%
Detection Tempt 25±10? Pressure 70——106MPa
2.5: Drop Testing
Height is 1000mm?Hard wood Experiment table thickness is 20mm, 6 surface, one testing in each direction.
After that to inspect the appearance?insulation resistance?dielectric strength and instruction again, the
appearance should be smooth without scratch?burr and others mechanical damage, exposed metal should be
no rust; No breakdown ?flash over phenomenon; insulation resistance>7MΩ; Instruction function and electric
properties is normal.
2.6: Plug Testing
Before testing used multi-meter to test the conductive is ok, appearance OK . After assembly the products to do
the plug simulation usage; plug after 3000 times repeatedly to check the conductive OK?never retreat PIN?
broken PIN?appearance OK.
2.7: Insulation resistance testing
Insulation resistance 500V DC voltage to keep 1 minute to test the insulation resistance won’t less than 100MΩ.
Now charge your Ego/510 batteries twice as fast as 420 mAh Chargers
Ego/510 Super Charger 800 mAh For charging your battery Twice as fast as Regular Ego Charger that is only 420mAh
Manufacturer Part Number: YD168-3
Manufacturer: Electronic Components