Description
WIMA FKP2/390/100/2.5% Polypropylene Film Capacitor 390pF 100V 2.5% Radial Through Hole
Wima Polypropylene (PP) Film and Foil Capacitors for Pulse Applications in PCM 5 mm
| Electrical Data |
Capacitance range:
33 pF to 0.033 µF (E12-values on request)
Rated voltages:
63VDC, 100VDC, 250VDC, 400VDC, 630VDC, 800VDC, 1000VDC
Capacitance tolerances:
±20%, ±10%, ±5%, ±2.5% (±2%, ±1.5% or ±1% available as precision capacitors subject to special enquiry)
Operating temperature range:
-55°C to +100°C
Test specifications:
IIn accordance with IEC 60384-13
Climatic test category:
55/100/56 in accordance with IEC
Insulation resistance at +20°C:
> 5 x 105 M (mean value: 1 x 106 M)
Measuring voltage:
Ur = 63V: Utest = 50 V/1 min.
Ur > 100V: Utest = 100 V/1 min.
Dissipation factors at +20°C: tan |
|
|
Test voltage: 2 Ur, 2 sec
Maximum pulse rise time:
1000 V/µsec for pulses equal to the rated voltage
Dielectric absorption: 0.05%
Temperature coefficient:
-200 x 10-6/°C (typical)
Voltage derating:
A voltage derating factor of 1.35% per K must be applied from +85°C for DC voltages and from +75°C for AC voltages
Reliability:
Operational life > 300000 hours
Failure rate < 5 fit (0.5 x Ur and 40°C)
|
|
| at f |
C < 1000 µF |
1000 pF < C < 4700 pF |
C > 4700 pF |
1kHz
10kHz
100kHz
1 MHz |
< 3 x 10-4
< 3 x 10-4
< 4 x 10-4
< 10 x 10-4 |
< 4 x 10-4
< 4 x 10-4
< 5 x 10-4
– |
< 4 x 10-4
< 4 x 10-4
–
– |
|
| |
| Mechanical Tests |
|
Packing |
Pull test on pins:
10 N in direction of pins according to IEC 60068-2-21
Vibration:
6 hours at 10…2000Hz and 0.75mm displacement amplitude or 10g in accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec2 in accordance with IEC 60068-2-29 |
Manufacturer Part Number: FKP2-390-100-2.5%
Manufacturer: WIMA
